Pathway Outline

Date retreived
22/07/2026 7:14 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Electrotechnology Pre-apprenticeship

Electrotechnology Pre-apprenticeship

Pathway
National Code
—
State Code
AA41
DTWD Status
Replaced
Associated Qualification
Certificate II in Electrotechnology (Career Start)
National Code
UEE22011
State Code
A114
TGA Status
Replaced
DTWD Status
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
17/04/2014
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Approved Date
28/06/2012
Stream of Study
Initial Vocational (3100 - 3600)
Duration
—
Current Release Version
4.00
Current Release Date
17/04/2014
Nominal Hours
313
Description
The aim of this pre-apprenticeship is to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into an indentured apprenticeship.
Packaging Rules
All core and elective units are mandated.

Pre-requisite information:
The unit UEENEEE101A is a pre-requisite for UEENEEE102A; UEENEEE104A; UEENEEE105A andUEENEEP024A
1. Core Units
All six (6) units must be completed
State Code National Code Title Hours Type
WC711 UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
WC442 UEENEEE148A Carry out routine work activities in an energy sector environment 36 Unit of competency
WC452 UEENEEE179A Identify and select components, accessories and materials for energy sector work activities 18 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
WC435 UEENEEE141A Use of routine equipment/plant/technologies in an energy sector environment 36 Unit of competency
2. Group A Imported and Common Elective Units
Both units must be completed.
State Code National Code Title Hours Type
WG730 HLTAID001 Provide cardiopulmonary resuscitation 3 Unit of competency
W9434 CPCCOHS1001A Work safely in the construction industry 4 Unit of competency
3. Group B Elective Units
All five (5) units must be completed.
State Code National Code Title Hours Type
S7431 UEENEEP024A Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC375 UEENEEA102A Select electronic components for assembly 18 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
4. Work Practice Coordination Modules
The following form part of the pre-apprenticeship program.
State Code National Code Title Hours Type
AW866 AW866 Module 1 (Placement arranged) 0 Module
AW867 AW867 Module 2 (Commenced) 0 Module
AW868 AW868 Module 3 (Mid-point) 0 Module
AW869 AW869 Module 4 (Completed) 0 Module
Replaces
State Code National Code Title Type
WC20 Electrotechnology Pre-Apprenticeship Pathway
Replaced By
State Code National Code Title Type
AC54 Electrotechnology Pre-apprenticeship Pathway
Note
1. The WA Pre-apprenticeship Program Business Rules provide for details on the requirements of the program. The business rules also outline the amount of work practice a student is to undertake and RTO responsibilities in relation to the pre-apprenticeship work practice component.

2. The set of work practice coordination modules should be used to indicate that the RTO has undertaken and completed its responsibilities for establishing and monitoring on-the-job work placements for each pre-apprentice.

3. RTOs should report students in each module when each phase of the work practice is achieved as follows:
- Module 1: when the RTO has completed “arranging and coordinating work placement” identified in Rule 2.4, including contacting suitable employer/s and arranging the on-the-job work placement, working collaboratively with schools if the pre-apprentice is a student enrolled at school.
- Module 2: when the pre-apprentice has commenced the first half of the on-the-job work placement with an employer.
- Module 3: when the pre-apprentice has commenced the remaining half of the on-the-job work placement with an employer.
- Module 4: when “monitoring work placement” and “evidence of the work practice component” identified in Rule 2.4, including the site visit/s, total number of hours of on-the-job work placement and log book with employer sign off have been completed.

4. The student does not incur course fees for the work practice coordination modules as the nominal hours value for each of these modules is zero.

5. The Department of Training and Workforce Development will use the work practice coordination modules reported for each pre-apprentice to monitor RTO efforts in arranging, coordinating and monitoring on-the-job work placements.

6. The work practice coordination modules are used to disburse funds to RTOs for coordinating the work practice component, and they do not relate to the actual hours of work practice a pre-apprentice must undertake.

7. The work practice coordination modules are non-assessable and do not specify skill and knowledge requirements.

8. Work practice coordination modules should only be reported as outcome “Non-assessable - satisfactorily completed”.

9. The work practice coordination modules are not to be used outside of nominated Department of Training and Workforce Development funded programs, which includes the WA Pre-apprenticeship Program.

Please refer to the WA Pre-apprenticeship Program Business Rules for details on the requirements of the program.
Entry Requirements
Not applicable.
No information