Pathway Outline
Date retreived
22/07/2026 7:39 PM AWST
22/07/2026 7:39 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Vehicle Trimming
SAL Kickstart Pre-Apprenticeship - Vehicle Trimming
Pathway
National Code
—
—
State Code
WB09
WB09
DTWD Status
Not Approved
Not Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
16/01/2006
16/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Trimming WB09 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20905.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Trimming WB09 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20905.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5258 | AURV271403A | Apply environmental regulations and best practice in the body repair industry | 20 | Unit of competency |
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
2. TECHNICAL INVENTORY UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5151 | AURV224508A | Carry out fabrication of components | 20 | Unit of competency |
| W5169 | AURV230608A | Carry out sewing repairs and alterations | 40 | Unit of competency |
| W5170 | AURV230708A | Carry out trim repairs and alterations | 40 | Unit of competency |
| W5172 | AURV231208A | Carry out trimming of vehicle components | 68 | Unit of competency |
| W5175 | AURV231649A | Prepare vehicle/component/equipment for customer use | 20 | Unit of competency |
| W5171 | AURV230864A | Remove and replace vehicle interior trim components | 20 | Unit of competency |
| W5174 | AURV231368A | Select and apply trim/fabric adhesives | 12 | Unit of competency |
| W5173 | AURV231268A | Select and apply trim/fabric materials and determine attachment methods | 20 | Unit of competency |
3. ELECTIVE UNITS
Complete the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2862 | AURE224008A | Carry out soldering of electrical wiring/circuits | 20 | Unit of competency |
| W5179 | AURV231809AA | Clean and finish plastic trim and fittings | 20 | Unit of competency |
| W5180 | AURV231809BA | Clean and finish vehicle interior trim and seats | 20 | Unit of competency |
| W5244 | AURV371481A | Implement and monitor environmental regulations and best practice in the body repair industry | 30 | Unit of competency |
| W5183 | AURV232165A | Remove, replace, fit and test components/accessories | 20 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
4. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA69 | Pre-Apprenticeship - Vehicle Trimming | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification AUR20905 Certificate II in Automotive Vehicle Body on 11 August 2010.
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not Applicable
