Qualification Outline
22/07/2026 2:58 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Automotive Vehicle Body
Certificate II in Automotive Vehicle Body
AUR20905
W207
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 20/12/2011 | Current | Approved |
Description
This qualification covers the skills and knowledge required to perform a range of tasks to repair and maintain the body of cars and other vehicles. It is suitable for entry into the automotive retail, service and repair industry.
Job roles/employment outcomes
The Certificate II in Automotive Vehicle Body is intended to prepare new employees or recognise and develop existing workers who perform repair and maintenance operations in an automotive repair business.
Employment outcomes targeted by this qualification include:
panel beater assistant
vehicle painter assistant
vehicle trimmer assistant
windscreen fitter
vehicle dismantler
vehicle detailer.
Application
This qualification is suitable for an Australian Apprenticeship pathway.
Schedule
Packaging Rules
QUALIFICATION REQUIREMENTS:To be awarded the Certificate II in Automotive Vehicle Body, competency must be achieved in thirteen (13) units of competency.
- one (1) core unit of competency
- twelve (12) elective units of competency, as specified below.
- one (1) elective unit of competency from Group A
- a minimum of eight (8) elective units of competency from Group B
- a maximum of three (3) elective units from Group C, drawn from any combination of:
- units not already chosen from Group B
- relevant units available in this Training Package, other endorsed Training Packages and accredited courses, where those units are aligned to Certificate II and III qualifications
- a maximum of two (2) elective units may be selected from units aligned to Certificate III qualifications.
Note: where prerequisite units are identified they must be counted in the total number of units required for completion of the qualification.
The following units of compete
Pathways
1. Core Unit
The following unit must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
2. Group A Elective Units
One (1) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5256 | AURC272003A | Apply environmental regulations and best practice in a workplace or business | 20 | Unit of competency |
| W5258 | AURV271403A | Apply environmental regulations and best practice in the body repair industry | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
3. Group B Other Elective Units
A minimum of eight (8) units to be completed from Group B.
Please refer to the Training Package for the full details of available units
4. Group C Balance of Units
The balance of units, to a maximum of three (3), may be drawn from any combination of:
- units not already chosen from Group B
- relevant units available in this Training Package, other endorsed Training Packages and accredited courses, where those units are aligned to Certificate II and III qualifications.
Please refer to the Training Package for the full details of available units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| E128 | AUR22499 | Certificate II in Automotive (Vehicle Body - Accessory Fitting "Mechanical") | Qualification |
| E129 | AUR22599 | Certificate II in Automotive (Vehicle Body - Detailing) | Qualification |
| E130 | AUR22699 | Certificate II in Automotive (Vehicle Body - Dismantling) | Qualification |
| E131 | AUR22799 | Certificate II in Automotive (Vehicle Body - Glazing) | Qualification |
| E132 | AUR22899 | Certificate II in Automotive (Vehicle Body - Paint/Panel Preparation) | Qualification |
| E133 | AUR22999 | Certificate II in Automotive (Vehicle Body - Window Tinting) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J378 | AUR20912 | Certificate II in Automotive Body Repair Technology | Qualification |
VET Info Notes
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 21 December 2005.
Entry Requirements
Not Applicable
Traineeships and Apprenticeships