Pathway Outline
Date retreived
22/07/2026 12:52 PM AWST
22/07/2026 12:52 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
SAL Kickstart Pre-Apprenticeship - Vehicle Body Building
SAL Kickstart Pre-Apprenticeship - Vehicle Body Building
Pathway
National Code
—
—
State Code
WB05
WB05
DTWD Status
Not Approved
Not Approved
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
16/01/2006
16/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
3 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
NOTE: No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Body Building Pathway WB05 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20905.
This training program leads to the completion of the Certificate II level SAL Pre-Apprenticeship Vehicle Body Building Pathway WB05 and the AUR05 Automotive Industry Retail, Service and Repair Training Package qualification AUR20905.
Packaging Rules
1. CORE UNITS
Complete ALL units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
2. ENVIRONMENTAL CORE UNITS
Complete a minimum of 1 (one) of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5256 | AURC272003A | Apply environmental regulations and best practice in a workplace or business | 20 | Unit of competency |
| W5258 | AURV271403A | Apply environmental regulations and best practice in the body repair industry | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
3. TECHNICAL INVENTORY UNITS
Complete 8 (eight) units from the Vehicle Body Inventory. The following is one example of units that may be selected. The AUR05 Automotive industry Retail, Service and Repair Training Package should be consulted for further information on the selection of units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5255 | AURV281208A | Carry out brazing procedures | 20 | Unit of competency |
| W5151 | AURV224508A | Carry out fabrication of components | 20 | Unit of competency |
| W5253 | AURV281408A | Carry out gas tungsten arc (TIG) welding procedures | 20 | Unit of competency |
| W5722 | AURV281508A | Carry out spot welding procedures | 20 | Unit of competency |
| W5186 | AURV323908A | Carry out thermoplastic welding procedures | 30 | Unit of competency |
| W5333 | MEM05007C | Perform manual heating and thermal cutting | 18 | Unit of competency |
| W5325 | MEM05004C | Perform routine oxy acetylene welding | 18 | Unit of competency |
| W5299 | MEM05017C | Weld using gas metal arc welding process | 36 | Unit of competency |
4. ELECTIVE UNITS
Complete 3 (three) elective units. The following is one example of units that may be selected. The AUR05 Automotive Industry Retail, Service and Repair Training Package should be consulted for further information on the selection of elective units. Total hours for the training program should not exceed 600.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2831 | AURC270789A | Communicate effectively in the workplace | 20 | Unit of competency |
| W2826 | AURC252327A | Identify, clarify and resolve problems | 20 | Unit of competency |
| W5175 | AURV231649A | Prepare vehicle/component/equipment for customer use | 20 | Unit of competency |
5. WORK PLACEMENT MODULES
Complete all modules.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 81541 | SAL Work Placement 1 | 50 | Module | |
| 81542 | SAL Work Placement 2 | 50 | Module | |
| 81543 | SAL Work Placement 3 | 50 | Module | |
| 81544 | SAL Work Placement 4 | 50 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA35 | Pre-Apprenticeship - Vehicle Body Building | Pathway |
Note
This training program has been created as a pathway of the Training Package qualification AUR20905 Certificate II in Automotive Vehicle Repair on 11 August 2010.
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Students enrolling in this pathway must be attending a secondary education institution, be enrolled as a Year 11 or Year 12 student and have academic achievement of satisfactory completion of Year 10.
The School Apprenticeship Link (SAL) Kickstart program is a pilot program. Students must be selected to participate in the program.
This qualification is the copyright of DEEWR.
Further information on this training program may be obtained from the Curriculum Development and Research Branch of the Department of Workplace Training and Development, Tel: 08 9229 5464.
** No new enrolments in this program as of 10 October 2011. Please enrol in the replacement program as indicated in the Replaces/Replaced section. **
Entry Requirements
Not Applicable
