Pathway Outline
Date retreived
22/07/2026 5:59 PM AWST
22/07/2026 5:59 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Panel Beating
Pre-Apprenticeship - Panel Beating
Pathway
National Code
—
—
State Code
WA37
WA37
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
16/01/2006
16/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
600
600
Description
This training program leads to the completion of Automotive Vehicle Panel Beating Pre-Apprenticeship Pathway WA37 and the AUR05 Automotive, Retail Service and Repair Training Package qualification AUR20905 Certificate II in Automotive Vehicle Body.
Packaging Rules
1. Core
This unit MUST be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
2. Vehicle Body Inventory Units
Eight (8) units to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5254 | AURV281108A | Carry out manual metal arc welding procedures | 20 | Unit of competency |
| W5152 | AURV225908A | Carry out panel repairs | 30 | Unit of competency |
| W5153 | AURV226108A | Carry out pre-repair operations (vehicle body) | 24 | Unit of competency |
| W5325 | MEM05004C | Perform routine oxy acetylene welding | 18 | Unit of competency |
| W5156 | AURV227064A | Remove and replace mechanical units/assemblies | 20 | Unit of competency |
| W5155 | AURV226965A | Remove and replace/fit protector mouldings, transfers and decals | 20 | Unit of competency |
| W5154 | AURV226864A | Remove, replace and realign bolt-on panels, sections and fittings | 58 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
3. Electives
Three (3) units to be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5255 | AURV281208A | Carry out brazing procedures | 20 | Unit of competency |
| W9852 | AURV281308A | Carry out gas metal arc (MIG) welding procedures | 30 | Unit of competency |
| W5722 | AURV281508A | Carry out spot welding procedures | 20 | Unit of competency |
| W5244 | AURV371481A | Implement and monitor environmental regulations and best practice in the body repair industry | 30 | Unit of competency |
| W5333 | MEM05007C | Perform manual heating and thermal cutting | 18 | Unit of competency |
| W5175 | AURV231649A | Prepare vehicle/component/equipment for customer use | 20 | Unit of competency |
| W2853 | AURE218676A | Test, service and charge batteries | 20 | Unit of competency |
4. Work Placement/Supervised Skills Practice
In addition to the units specified for the qualification, some of the following units may be included. The total nominal hours for the qualification plus Supervised Skills Practice/Work Placement hours must not exceed 600 hours.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
5. Environmental Core Units
A minimum of one (1) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5256 | AURC272003A | Apply environmental regulations and best practice in a workplace or business | 20 | Unit of competency |
| W5258 | AURV271403A | Apply environmental regulations and best practice in the body repair industry | 20 | Unit of competency |
| W5026 | AURT271781A | Implement and monitor environmental regulations in the automotive mechanical industry | 20 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB07 | SAL Kickstart Pre-apprenticeship - Panel Beating | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WB78 | Pre-Apprenticeship - Panel Beating | Pathway |
Note
This training program has been created as a pathway of the Training Package AUR05 qualification AUR20905, on 17/6/2009.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
Further information on this training program may be obtained from the Manager, Training Product Information Services, Department of Education & Training, Tel: 08 9264 4621.
WA37 outline was amended ton 3/9/09 as per Swan TAFE request.
This qualification/pathway is the copyright of DEEWR and should be consulted for full description of requirements
Further information on this training program may be obtained from the Manager, Training Product Information Services, Department of Education & Training, Tel: 08 9264 4621.
WA37 outline was amended ton 3/9/09 as per Swan TAFE request.
Entry Requirements
Not Applicable
