Pathway Outline
Date retreived
22/07/2026 10:11 PM AWST
22/07/2026 10:11 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Panel Beating
Pre-Apprenticeship - Panel Beating
Pathway
National Code
—
—
State Code
WB78
WB78
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
17/01/2013
17/01/2013
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
11/07/2013
11/07/2013
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
17/01/2013
17/01/2013
Nominal Hours
600
600
Description
This training program aims to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into a Panel Beating apprenticeship.
Please refer to the Certificate II Pre-apprenticeship Business rules located at http://vetinfonet.dtwd.wa.gov.au/VETpolicyandguidelines/Pages/ApprenticeshipsTraineeshipsandPre-apprenticeships.aspx
Please refer to the Certificate II Pre-apprenticeship Business rules located at http://vetinfonet.dtwd.wa.gov.au/VETpolicyandguidelines/Pages/ApprenticeshipsTraineeshipsandPre-apprenticeships.aspx
Packaging Rules
1. Core Units
All five (5) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WF460 | AURVEN2001 | Apply environmental regulations and best practice in the body repair industry | 20 | Unit of competency |
| WF032 | AURASA2002 | Apply safe working practices in an automotive workplace | 20 | Unit of competency |
| WF011 | AURAFA2002 | Read in an automotive workplace | 12 | Unit of competency |
| WF421 | AURTTK2002 | Use and maintain workplace tools and equipment | 20 | Unit of competency |
| WF021 | AURAMA2001 | Work effectively with others | 20 | Unit of competency |
2. Specialist Elective Units - Auto Body Repair
All three (3) units to be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WF485 | AURVTN2002 | Carry out panel repairs | 30 | Unit of competency |
| WF486 | AURVTN2003 | Carry out pre-repair vehicle body operations | 24 | Unit of competency |
| WF502 | AURVTN3016 | Repair body panels incorporating filler | 30 | Unit of competency |
3. Elective Units
Five (5) units to be completed.
The following outlines an example of a training program for this qualification.
Please refer to the Training Package for the full details of available units.
The following outlines an example of a training program for this qualification.
Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WF541 | AURVTP3020 | Carry out denibbing, buffing and polishing | 30 | Unit of competency |
| WF499 | AURVTN3013 | Carry out paint-less dent repairs | 30 | Unit of competency |
| WF555 | AURVTT2003 | Remove and replace vehicle interior trim components | 20 | Unit of competency |
| WF487 | AURVTN2004 | Remove, replace and realign bolt-on panels, sections and fittings | 58 | Unit of competency |
| WF483 | AURVTK2001 | Use and maintain vehicle body repair hand tools | 15 | Unit of competency |
4. Work Placement/Supervised Skills Practice
A minimum of 120 hours must be supervised and completed in the workplace. Please refer to the Certificate II Pre-apprenticeship Business Rules for details.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0315 | Supervised Skills Practice 3 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA37 | Pre-Apprenticeship - Panel Beating | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC10 | Panel Beating Pre-Apprenticeship | Pathway |
Note
1.This training program has been created as a pathway of the AUR12 Automotive Industry Retail, Service and Repair Training Package qualification AUR20912 Certificate II in Automotive Body Repair Technology. This qualification should be consulted for a full description of requirements.
2. Further information on this training program may be obtained from Training Curriculum Services, Department of Training and Workforce Development on (08) 9229 5424 or email vetinfonet@dtwd.wa.gov.au.
3. Information was created in STARS on 17/07/2013.
2. Further information on this training program may be obtained from Training Curriculum Services, Department of Training and Workforce Development on (08) 9229 5424 or email vetinfonet@dtwd.wa.gov.au.
3. Information was created in STARS on 17/07/2013.
Entry Requirements
This qualification may be accessed by direct entry.
