Pathway Outline
Date retreived
22/07/2026 11:21 AM AWST
22/07/2026 11:21 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship (Automotive Electrical)
Pre-Apprenticeship (Automotive Electrical)
Pathway
National Code
—
—
State Code
WB71
WB71
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
17/01/2013
17/01/2013
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
11/07/2013
11/07/2013
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
17/01/2013
17/01/2013
Nominal Hours
600
600
Description
This training program aims to provide learners with industry specific training to gain skills, knowledge and behaviours to enable transition into an apprenticeship in Automotive Electrical.
Please refer to the Certificate II Pre-apprenticeship Business rules located at http://vetinfonet.dtwd.wa.gov.au/VETpolicyandguidelines/Pages/ApprenticeshipsTraineeshipsandPre-apprenticeships.aspx
Please refer to the Certificate II Pre-apprenticeship Business rules located at http://vetinfonet.dtwd.wa.gov.au/VETpolicyandguidelines/Pages/ApprenticeshipsTraineeshipsandPre-apprenticeships.aspx
Packaging Rules
1. Core Units
All ten (10) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WF007 | AURAEA2002 | Apply environmental and sustainability best practice in an automotive workplace | 20 | Unit of competency |
| WF032 | AURASA2002 | Apply safe working practices in an automotive workplace | 20 | Unit of competency |
| WF086 | AURETR2006 | Carry out soldering of electrical wiring and circuits | 20 | Unit of competency |
| WF087 | AURETR2007 | Demonstrate knowledge of automotive electrical circuits and wiring systems | 18 | Unit of competency |
| WF095 | AURETR2015 | Inspect and service batteries | 20 | Unit of competency |
| WF091 | AURETR2011 | Install and test basic ancillary electrical components | 20 | Unit of competency |
| WF089 | AURETR2009 | Install, test and repair vehicle lighting and wiring systems | 20 | Unit of competency |
| WF088 | AURETR2008 | Remove and replace electrical units and assemblies | 15 | Unit of competency |
| WF092 | AURETR2012 | Test and repair basic electrical circuits | 30 | Unit of competency |
| WF081 | AURETK2002 | Use and maintain automotive electrical test equipment | 18 | Unit of competency |
2. Elective Units
Six (6) units to be completed.
The following outlines an example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
The following outlines an example of a training program for this qualification. Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WF012 | AURAFA2003 | Communicate effectively in an automotive workplace | 20 | Unit of competency |
| WF090 | AURETR2010 | Fabricate, test and repair wiring harnesses and looms | 55 | Unit of competency |
| WF080 | AURETK1001 | Identify, select and use low voltage electrical test equipment | 10 | Unit of competency |
| WF409 | AURTTE2004 | Inspect and service engines | 20 | Unit of competency |
| WF107 | AURETR3025 | Test, charge and replace batteries | 20 | Unit of competency |
| WF420 | AURTTK2001 | Use and maintain measuring equipment in an automotive workplace | 16 | Unit of competency |
| WF421 | AURTTK2002 | Use and maintain workplace tools and equipment | 20 | Unit of competency |
3. Work Placemnet/Supervised Skills Practice
A minimum of 120 hours must be supervised and completed in the workplace. Please refer to the Certificate II Pre-apprenticeship Business Rules for details.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| Y0303 | Y0303 | Supervised Skills Practice 1 | 40 | Module |
| Y0300 | Supervised Skills Practice 2 | 40 | Module | |
| Y0315 | Supervised Skills Practice 3 | 40 | Module | |
| Y0281 | Work Placement 1 | 40 | Module | |
| Y0282 | Work Placement 2 | 40 | Module | |
| Y0283 | Work Placement 3 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA31 | Pre-Apprenticeship (Automotive Electrical) | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC04 | Automotive Electrical Pre-Apprenticeship | Pathway |
Note
1. This training program has been created as a pathway of the AUR12 Automotive Industry Retail, Service and Repair Training Package qualification AUR20412 Certificate II in Automotive Electrical Technology. This qualification should be consulted for a full description of requirements.
2. Further information on this training program may be obtained from Training Curriculum Services, Department of Training and Workforce Development on (08) 9229 5424 or email vetinfonet@dtwd.wa.gov.au.
3. Information was created in STARS on 17/07/2013.
2. Further information on this training program may be obtained from Training Curriculum Services, Department of Training and Workforce Development on (08) 9229 5424 or email vetinfonet@dtwd.wa.gov.au.
3. Information was created in STARS on 17/07/2013.
Entry Requirements
This qualification may be accessed by direct entry.
(TR06110) AUTOMOTIVE ELECTRICAL TECHNOLOGY (LEVEL 2)
Traineeship