Pathway Outline
Date retreived
22/07/2026 2:21 PM AWST
22/07/2026 2:21 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship - Furnishing (Glass and Glazing)
Pre-Apprenticeship - Furnishing (Glass and Glazing)
Pathway
National Code
—
—
State Code
WT58
WT58
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
11/05/2009
11/05/2009
Field of Education
0301 - Manufacturing Engineering And Technology
0301 - Manufacturing Engineering And Technology
Approved Date
15/12/2003
15/12/2003
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
1.00
1.00
Current Release Date
11/05/2009
11/05/2009
Nominal Hours
600
600
Description
THIS PROGRAM REPLACES WS39 PRE-APPRENTICESHIP (GLASS AND GLAZING)
This training program leads to the completion of Pre-Apprenticeship Furnishing - Glass and Glazing Pathway WT58 and LMF02 Furnishing Training Package qualification LMF02 Certificate I Furnishing.
This training program leads to the completion of Pre-Apprenticeship Furnishing - Glass and Glazing Pathway WT58 and LMF02 Furnishing Training Package qualification LMF02 Certificate I Furnishing.
Packaging Rules
1. Core units
Complete ALL core units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0313 | LMFGG2002A | Apply first aid | 8 | Unit of competency |
| W0245 | LMFCR0003A | Carry out measurements and calculations | 20 | Unit of competency |
| W0231 | LMFCR0002A | Communicate in the workplace | 20 | Unit of competency |
| W0311 | LMFGG1001A | Complete a basic glass and glazing project | 80 | Unit of competency |
| W0223 | LMFCR0001A | Follow safe working policies and practices | 40 | Unit of competency |
| W0316 | LMFGG2005A | Move glass sheets by hand | 8 | Unit of competency |
| W0314 | LMFGG2003A | Operate glass freefall rack and table | 8 | Unit of competency |
| W0315 | LMFGG2004A | Process thin glass by hand | 64 | Unit of competency |
| W0312 | LMFGG2001A | Use glass and glazing sector hand and power tools | 44 | Unit of competency |
| W0251 | LMFCR0004A | Work effectively with others | 15 | Unit of competency |
2. Support units.
Complete the following units. Units from other endorsed Training Packages or accredited course may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3513 | BSBCMN102A | Complete daily work activities | 20 | Unit of competency |
| C3512 | BSBCMN101A | Prepare for work | 30 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
3. Work placement/Project units.
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WS39 | Pre-apprenticeship (Glass and Glazing) | Pathway |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WA73 | Pre-Apprenticeship - (Glass and Glazing) | Pathway |
Note
This training program replaces WS39 Pre-apprenticeship (Glass and Glazing).
This training program was created on 24/09/2008, by METS CSSN as a pathway of LMF10102 Certificate I Furnishing.
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
This training program was created on 24/09/2008, by METS CSSN as a pathway of LMF10102 Certificate I Furnishing.
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
No information