Pathway Outline
Date retreived
22/07/2026 10:59 AM AWST
22/07/2026 10:59 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Pre-Apprenticeship (Automotive Electrical)
Pre-Apprenticeship (Automotive Electrical)
Pathway
National Code
—
—
State Code
WA10
WA10
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
20/12/2011
20/12/2011
Field of Education
0305 - Automotive Engineering And Technology
0305 - Automotive Engineering And Technology
Approved Date
13/01/2006
13/01/2006
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
1 Semester
Current Release Version
2.00
2.00
Current Release Date
20/12/2011
20/12/2011
Nominal Hours
599
599
Description
NOTE: Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
THIS PROGRAM REPLACES WS98 PRE-APPRENTICESHIP (ELECTRICAL).
This training program leads to the completion of Automotive Electrical Pre-Apprenticeship Pathway WA10 and the AUR05 Automotive, Retail Service and Repair Training Package qualification AUR10105 Certificate I in Automotive.
THIS PROGRAM REPLACES WS98 PRE-APPRENTICESHIP (ELECTRICAL).
This training program leads to the completion of Automotive Electrical Pre-Apprenticeship Pathway WA10 and the AUR05 Automotive, Retail Service and Repair Training Package qualification AUR10105 Certificate I in Automotive.
Packaging Rules
1. Core units
Complete ALL Core units.
2. Support Units
Complete the following units. Units from other endorsed Training Packages or accredited course may be used to provide language/literacy/numeracy development and/or support in place of the units listed below.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2975 | AURT100308A | Carry out workshop practice activities | 36 | Unit of competency |
| C3513 | BSBCMN102A | Complete daily work activities | 20 | Unit of competency |
| W2823 | AURC251356A | Read in the workplace | 12 | Unit of competency |
| W2824 | AURC251677A | Use numbers in the workplace | 20 | Unit of competency |
3. Work placement/Project units
Complete ALL of the following units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 50647 | Undertake a Basic Project - 1 | 40 | Module | |
| 50648 | Undertake a Basic Project - 2 | 40 | Module | |
| 50649 | Undertake a Basic Project - 3 | 40 | Module | |
| 50650 | Undertake a Work Placement - 1 | 40 | Module | |
| 50651 | Undertake a Work Placement - 2 | 40 | Module |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WS98 | Pre-Apprentice (Electrical) | Pathway |
Note
This training program was created on 30/05/2008, by METS CSSN as a pathway of AUR10105 Certificate I in Automotive.
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This training program replaces WS98 Pre-apprenticeship (Automotive Electrical).
Further information on this program may be obtained by contacting the METS CSSN on 9442 8356 murray.warren@swantafe.wa.edu.au
The units 50647, 50648, 50649, 50550, 50651 have been developed for use in pre-apprenticeship programs in WA. These units should NOT be included in other training programs without first obtaining permission from the manager of the METS CSSN.
*** Certificate I pre-apprenticeship programs are for the delivery of pre-apprenticeships for regional and remote areas only. Training providers can apply to the Department of Training and Workforce Development (DTWD) to deliver this program.
This training program replaces WS98 Pre-apprenticeship (Automotive Electrical).
Entry Requirements
Not Applicable
