Qualification Outline

Date retreived
22/07/2026 4:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in General Construction (Demolition)

Certificate III in General Construction (Demolition)

Qualification
National Code:
BCG31098
State Code:
N021
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
08/10/1998
Approved Date
02/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
760
Duration
Unspecified
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 08/10/1998 Current Archived
Description
Schedule
1. ELECTIVES

To obtain this qualification all core competencies plus a minimum of three electives must be achieved.

State Code National Code Title Hours Type
N0088 BCG2003A Carry out general demolition 12 Unit of competency
N0193 BCG3002A Carry out general demolition (manual/ mechanical) 32 Unit of competency
N0075 BCG1000A Carry out interactive workplace communication 16 Unit of competency
N0089 BCG2004A Carry out levelling 12 Unit of competency
N0079 BCG1004A Carry out measurements and calculations 16 Unit of competency
N0076 BCG1001A Carry out OH&S requirements 32 Unit of competency
N0192 BCG3001A Encapsulate and remove asbestos 32 Unit of competency
N0084 BCG1007A Erect and dismantle restricted height scaffolding 16 Unit of competency
N0083 BCG1011A Handle construction materials and safely dispose of waste 8 Unit of competency
N0194 BCG3003A Operate demolition plant and equipment 80 Unit of competency
N0090 BCG2007A Operate elevating work platforms (EWP) 8 Unit of competency
N0077 BCG1002A Plan and organise work 16 Unit of competency
N0096 BCG1017A Prepare for construction process (demolition) 36 Unit of competency
N0087 BCG2001A Prepare surfaces 24 Unit of competency
N0078 BCG1003A Read and interpret plans 32 Unit of competency
N0080 BCG1005A Use hand and power tools 40 Unit of competency
N0082 BCG1008A Use simple levelling devices 8 Unit of competency
N0081 BCG1006A Use small plant and equipment 12 Unit of competency
2. ELECTIVE

Three electives must be achieved from the following Series 3000 electives. N0213 BCC3008A Conduct Skid Steer Loader Operations is taken from the Civil Construction Training Package.

State Code National Code Title Hours Type
N0213 BCC3008A Conduct skid steer loader operations 240 Unit of competency
N0198 BCG3007A Dispatch crushings 8 Unit of competency
N0195 BCG3004A Operate crushing plant 30 Unit of competency
N0197 BCG3006A Operate loader 80 Unit of competency
N0199 BCG3119A Operate pulveriser 16 Unit of competency
N0196 BCG3005A Remove contaminants - belt picker 8 Unit of competency
N0191 BCG3042A Undertake rigging 196 Unit of competency
Replaced By
State Code National Code Title Type
W138 BCG30403 Certificate III in Demolition (General Construction) Qualification
VET Info Notes
GENERAL NOTE

This training program is a representation of the qualification BCG31098 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCG98 is accredited until 22/10/2001

1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.

2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the CMS by the Training Products
and Information Service on 20/8/99.
Entry Requirements
No information
Traineeships and Apprenticeships
No information