Unit of competency Outline
Date retreived
23/07/2026 5:02 AM AWST
23/07/2026 5:02 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Operate elevating work platforms (EWP)
Operate elevating work platforms (EWP)
Unit of competency
National Code
BCG2007A
BCG2007A
State Code
N0090
N0090
TGA Status
Deleted
Deleted
DTWD Status
Archived
Archived
State Implementation and Classification
Approved Date
05/06/2002
Field of Education
030717 - Plant And Machine Operations
Original Release Date
05/06/2002
Nominal Hours
8
Description
Not applicable.
Notes
Elements and Performance Criteria
1 Plan and prepare work
- 1.1 Metadata only. Please contact NTIS/DEEWR
2 Conduct routine checks of platform
- 2.1 Metadata only. Please contact NTIS/DEEWR
3 Locate equipment in place for work application
- 3.1 Metadata only. Please contact NTIS/DEEWR
4 Elevate platform to work location
- 4.1 Metadata only. Please contact NTIS/DEEWR
5 Lower platform and shut down
- 5.1 Metadata only. Please contact NTIS/DEEWR
6 Clean up
- 6.1 Metadata only. Please contact NTIS/DEEWR
This unit applies to mobile hydraulic and mechanical platforms not exceeding 11 metres in lift capacity which may be operated from ground, pavement or floor surfaces.
Elevating Work Platforms include but are not limited to:
scissor type
extending arm (cherry picker)
Work applications may include but are not limited to:
painting
erecting signs
fixing steelwork
minor repair work to buildings
OH&S requirements to be in accordance with State/Territory legislation and regulations and may include:
operation of mechanical equipment
protective clothing and equipment
worksite environment and safety
handling of materials
emergency procedures
Personal Protective equipment may include:
coveralls
safety boots
hard hat/cap
gloves
safety glasses/goggles
ear plugs/muffs
dust masks/respirator
Safety hazards may include but are not limited to:
obstacles in pathway or on face of walls
limited space
other activities within vicinity
weather conditions
Work undertaken in a team situation under supervision where instructions would be part of supervisor's directions. Instructions and reporting of faults may be verbal or written.
This unit applies to mobile hydraulic and mechanical platforms not exceeding 11 metres in lift capacity which may be operated from ground, pavement or floor surfaces.
Elevating Work Platforms include but are not limited to:
scissor type
extending arm (cherry picker)
Work applications may include but are not limited to:
painting
erecting signs
fixing steelwork
minor repair work to buildings
OH&S requirements to be in accordance with State/Territory legislation and regulations and may include:
operation of mechanical equipment
protective clothing and equipment
worksite environment and safety
handling of materials
emergency procedures
Personal Protective equipment may include:
coveralls
safety boots
hard hat/cap
gloves
safety glasses/goggles
ear plugs/muffs
dust masks/respirator
Safety hazards may include but are not limited to:
obstacles in pathway or on face of walls
limited space
other activities within vicinity
weather conditions
Work undertaken in a team situation under supervision where instructions would be part of supervisor's directions. Instructions and reporting of faults may be verbal or written.
Elevating Work Platforms include but are not limited to:
scissor type
extending arm (cherry picker)
Work applications may include but are not limited to:
painting
erecting signs
fixing steelwork
minor repair work to buildings
OH&S requirements to be in accordance with State/Territory legislation and regulations and may include:
operation of mechanical equipment
protective clothing and equipment
worksite environment and safety
handling of materials
emergency procedures
Personal Protective equipment may include:
coveralls
safety boots
hard hat/cap
gloves
safety glasses/goggles
ear plugs/muffs
dust masks/respirator
Safety hazards may include but are not limited to:
obstacles in pathway or on face of walls
limited space
other activities within vicinity
weather conditions
Work undertaken in a team situation under supervision where instructions would be part of supervisor's directions. Instructions and reporting of faults may be verbal or written.
This unit applies to mobile hydraulic and mechanical platforms not exceeding 11 metres in lift capacity which may be operated from ground, pavement or floor surfaces.
Elevating Work Platforms include but are not limited to:
scissor type
extending arm (cherry picker)
Work applications may include but are not limited to:
painting
erecting signs
fixing steelwork
minor repair work to buildings
OH&S requirements to be in accordance with State/Territory legislation and regulations and may include:
operation of mechanical equipment
protective clothing and equipment
worksite environment and safety
handling of materials
emergency procedures
Personal Protective equipment may include:
coveralls
safety boots
hard hat/cap
gloves
safety glasses/goggles
ear plugs/muffs
dust masks/respirator
Safety hazards may include but are not limited to:
obstacles in pathway or on face of walls
limited space
other activities within vicinity
weather conditions
Work undertaken in a team situation under supervision where instructions would be part of supervisor's directions. Instructions and reporting of faults may be verbal or written.
Competency is to be demonstrated by the safe and effective operation using any of the EWP's listed within the range of variables statement relative to the work orientation.
(1) Critical Aspects and Evidence
It is essential that competence is observed in the following aspects:
demonstrate compliance with Occupational Health and Safety regulations applicable to work place operations.
show compliance with organisational policies and procedures including quality assurance requirements.
correct procedures carried out prior to, during and after the use of Elevating Work Platform
demonstrate safe and effective operational use of plant, tools and equipment
demonstrate safe and effective work application while in set elevated position
interactive communication with other to ensure safe and effective workplace operations
(2) Pre-requisite Relationship of Units
Competency in this unit may be determined concurrently with other units relevant to the work orientation, based upon integrated project work.
Pre-requisites for this unit are:
BCG1001A Carry out OH&S requirements
BCG1005A Use hand and power tools
BCG1006A Use small plant and equipment
(3) Underpinning Knowledge and Skills
Knowledge
A knowledge of:
workplace and equipment safety requirements relative to EWP's
a range of EWP's
operation and maintenance of equipment
use of hand and power tools
drawings and specifications
communication processes - verbal and signalling
materials and material fixing
Skills
The ability to:
work safely to instructions
interpret drawings and specifications
use hand tools
use plant and equipment
fix materials
communicate effectively
(4) Resource Implications
The following resources should be made available:
appropriate Elevating Work Platform
plant and equipment appropriate to the EWP
hand tools and materials appropriate to the work application from the EWP
suitable work area appropriate to the operation of EWP
appropriate operation and manufacturer' s specification manual
(5) Method of Assessment
Competency shall be assessed while work is undertaken under direct supervision with regular checks, but may take the form of some autonomy when working as part of a team.
Assessment should be by direct observation of application to tasks and questioning related to underpinning knowledge.
Assessment may be by intermittent checking at the various stages of the job application in accordance with the performance criteria, or may be at the completion of each process.
(6) Context of Assessment
Competency shall be assessed in the workplace or simulated workplace environment and in accordance with work practices and safety procedures.
Competency is to be demonstrated by the safe and effective operation using any of the EWP's listed within the range of variables statement relative to the work orientation.
(1) Critical Aspects and Evidence
It is essential that competence is observed in the following aspects:
demonstrate compliance with Occupational Health and Safety regulations applicable to work place operations.
show compliance with organisational policies and procedures including quality assurance requirements.
correct procedures carried out prior to, during and after the use of Elevating Work Platform
demonstrate safe and effective operational use of plant, tools and equipment
demonstrate safe and effective work application while in set elevated position
interactive communication with other to ensure safe and effective workplace operations
(2) Pre-requisite Relationship of Units
Competency in this unit may be determined concurrently with other units relevant to the work orientation, based upon integrated project work.
Pre-requisites for this unit are:
BCG1001A Carry out OH&S requirements
BCG1005A Use hand and power tools
BCG1006A Use small plant and equipment
(3) Underpinning Knowledge and Skills
Knowledge
A knowledge of:
workplace and equipment safety requirements relative to EWP's
a range of EWP's
operation and maintenance of equipment
use of hand and power tools
drawings and specifications
communication processes - verbal and signalling
materials and material fixing
Skills
The ability to:
work safely to instructions
interpret drawings and specifications
use hand tools
use plant and equipment
fix materials
communicate effectively
(4) Resource Implications
The following resources should be made available:
appropriate Elevating Work Platform
plant and equipment appropriate to the EWP
hand tools and materials appropriate to the work application from the EWP
suitable work area appropriate to the operation of EWP
appropriate operation and manufacturer' s specification manual
(5) Method of Assessment
Competency shall be assessed while work is undertaken under direct supervision with regular checks, but may take the form of some autonomy when working as part of a team.
Assessment should be by direct observation of application to tasks and questioning related to underpinning knowledge.
Assessment may be by intermittent checking at the various stages of the job application in accordance with the performance criteria, or may be at the completion of each process.
(6) Context of Assessment
Competency shall be assessed in the workplace or simulated workplace environment and in accordance with work practices and safety procedures.
(1) Critical Aspects and Evidence
It is essential that competence is observed in the following aspects:
demonstrate compliance with Occupational Health and Safety regulations applicable to work place operations.
show compliance with organisational policies and procedures including quality assurance requirements.
correct procedures carried out prior to, during and after the use of Elevating Work Platform
demonstrate safe and effective operational use of plant, tools and equipment
demonstrate safe and effective work application while in set elevated position
interactive communication with other to ensure safe and effective workplace operations
(2) Pre-requisite Relationship of Units
Competency in this unit may be determined concurrently with other units relevant to the work orientation, based upon integrated project work.
Pre-requisites for this unit are:
BCG1001A Carry out OH&S requirements
BCG1005A Use hand and power tools
BCG1006A Use small plant and equipment
(3) Underpinning Knowledge and Skills
Knowledge
A knowledge of:
workplace and equipment safety requirements relative to EWP's
a range of EWP's
operation and maintenance of equipment
use of hand and power tools
drawings and specifications
communication processes - verbal and signalling
materials and material fixing
Skills
The ability to:
work safely to instructions
interpret drawings and specifications
use hand tools
use plant and equipment
fix materials
communicate effectively
(4) Resource Implications
The following resources should be made available:
appropriate Elevating Work Platform
plant and equipment appropriate to the EWP
hand tools and materials appropriate to the work application from the EWP
suitable work area appropriate to the operation of EWP
appropriate operation and manufacturer' s specification manual
(5) Method of Assessment
Competency shall be assessed while work is undertaken under direct supervision with regular checks, but may take the form of some autonomy when working as part of a team.
Assessment should be by direct observation of application to tasks and questioning related to underpinning knowledge.
Assessment may be by intermittent checking at the various stages of the job application in accordance with the performance criteria, or may be at the completion of each process.
(6) Context of Assessment
Competency shall be assessed in the workplace or simulated workplace environment and in accordance with work practices and safety procedures.
Competency is to be demonstrated by the safe and effective operation using any of the EWP's listed within the range of variables statement relative to the work orientation.
(1) Critical Aspects and Evidence
It is essential that competence is observed in the following aspects:
demonstrate compliance with Occupational Health and Safety regulations applicable to work place operations.
show compliance with organisational policies and procedures including quality assurance requirements.
correct procedures carried out prior to, during and after the use of Elevating Work Platform
demonstrate safe and effective operational use of plant, tools and equipment
demonstrate safe and effective work application while in set elevated position
interactive communication with other to ensure safe and effective workplace operations
(2) Pre-requisite Relationship of Units
Competency in this unit may be determined concurrently with other units relevant to the work orientation, based upon integrated project work.
Pre-requisites for this unit are:
BCG1001A Carry out OH&S requirements
BCG1005A Use hand and power tools
BCG1006A Use small plant and equipment
(3) Underpinning Knowledge and Skills
Knowledge
A knowledge of:
workplace and equipment safety requirements relative to EWP's
a range of EWP's
operation and maintenance of equipment
use of hand and power tools
drawings and specifications
communication processes - verbal and signalling
materials and material fixing
Skills
The ability to:
work safely to instructions
interpret drawings and specifications
use hand tools
use plant and equipment
fix materials
communicate effectively
(4) Resource Implications
The following resources should be made available:
appropriate Elevating Work Platform
plant and equipment appropriate to the EWP
hand tools and materials appropriate to the work application from the EWP
suitable work area appropriate to the operation of EWP
appropriate operation and manufacturer' s specification manual
(5) Method of Assessment
Competency shall be assessed while work is undertaken under direct supervision with regular checks, but may take the form of some autonomy when working as part of a team.
Assessment should be by direct observation of application to tasks and questioning related to underpinning knowledge.
Assessment may be by intermittent checking at the various stages of the job application in accordance with the performance criteria, or may be at the completion of each process.
(6) Context of Assessment
Competency shall be assessed in the workplace or simulated workplace environment and in accordance with work practices and safety procedures.
