Qualification Outline

Date retreived
22/07/2026 5:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in General Construction (Concreting/Steelfixing)

Certificate III in General Construction (Concreting/Steelfixing)

Qualification
National Code:
BCG31298
State Code:
N023
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
08/10/1998
Approved Date
02/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
616
Duration
Unspecified
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 08/10/1998 Current Archived
Description
Schedule
1. ELECTIVES

To obtain this qualification all core competencies plus a minimum of three electives must be achieved.

State Code National Code Title Hours Type
N0104 BCG2009A Carry out concrete work 40 Unit of competency
N0086 BCG1010A Carry out concreting to simple forms 24 Unit of competency
N0085 BCG1009A Carry out excavation and install support 16 Unit of competency
N0088 BCG2003A Carry out general demolition 12 Unit of competency
N0075 BCG1000A Carry out interactive workplace communication 16 Unit of competency
N0089 BCG2004A Carry out levelling 12 Unit of competency
N0079 BCG1004A Carry out measurements and calculations 16 Unit of competency
N0076 BCG1001A Carry out OH&S requirements 32 Unit of competency
N0102 BCG2006A Carry out steelfixing 40 Unit of competency
N0203 BCG3060A Cure concrete 8 Unit of competency
N0084 BCG1007A Erect and dismantle restricted height scaffolding 16 Unit of competency
N0101 BCG2005A Erect and strip formwork for concrete work 32 Unit of competency
N0200 BCG3057A Finish concrete 20 Unit of competency
N0083 BCG1011A Handle construction materials and safely dispose of waste 8 Unit of competency
N0090 BCG2007A Operate elevating work platforms (EWP) 8 Unit of competency
N0202 BCG3059A Place concrete 12 Unit of competency
N0077 BCG1002A Plan and organise work 16 Unit of competency
N0097 BCG1018A Prepare for construction process (steelwork) 36 Unit of competency
N0087 BCG2001A Prepare surfaces 24 Unit of competency
N0078 BCG1003A Read and interpret plans 32 Unit of competency
N0201 BCG3058A Transport concrete 8 Unit of competency
N0080 BCG1005A Use hand and power tools 40 Unit of competency
N0082 BCG1008A Use simple levelling devices 8 Unit of competency
N0081 BCG1006A Use small plant and equipment 12 Unit of competency
N0204 BCG3064A Weld using manual metal arc welding process (MMAW) 40 Unit of competency
2. ELECTIVES

Three electives must be achieved from the following Series 3000 electives.

State Code National Code Title Hours Type
N0205 BCG3061A Apply reinforcement schedule 16 Unit of competency
N0208 BCG3065A Carry out monostrand post tensioning 24 Unit of competency
N0206 BCG3062A Carry out special finishes to concrete 16 Unit of competency
N0209 BCG3066A Carry out stressbar post tensioning 16 Unit of competency
N0207 BCG3063A Carry out tilt slab construction 24 Unit of competency
N0178 BCG3034A Erect/dismantle formwork 40 Unit of competency
Replaced By
State Code National Code Title Type
W137 BCG30303 Certificate III in Concreting Qualification
W145 BCG31103 Certificate III in Steel Fixing Qualification
VET Info Notes
GENERAL NOTE

This training program is a representation of the qualification BCG31298 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCG98 is accredited until 22/10/2001

1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.

2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the CMS by the Training Products
and Information Service on 20/8/99.
Entry Requirements
No information
Traineeships and Apprenticeships
No information