Qualification Outline
Date retreived
22/07/2026 4:26 AM AWST
22/07/2026 4:26 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Civil Construction (Foundation Work - Anchors/Piling)
Certificate III in Civil Construction (Foundation Work - Anchors/Piling)
Qualification
National Code:
BCC30598
BCC30598
State Code:
N036
N036
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0307 - Mechanical And Industrial Engineering And Technology
Original TGA Release Date
08/10/1998
Approved Date
—
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
264
Duration
Unspecified
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/10/1998 | Current | Archived |
Description
Schedule
1. CORE
To obtain this qualification all core competencies plus a minimum of three electives from the 1000 and 2000 series must be achieved AND three electives fromthe 3000 series. Where BCG units are used, they are taken from the General Construction Training Package.
2. ELECTIVES
Three electives must be achieved from the 1000 and 2000 series.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0223 | BCC2001A | Carry out basic site survey | 40 | Unit of competency |
| N0084 | BCG1007A | Erect and dismantle restricted height scaffolding | 16 | Unit of competency |
| N0225 | BCC2004A | Lay pipes | 40 | Unit of competency |
| N0090 | BCG2007A | Operate elevating work platforms (EWP) | 8 | Unit of competency |
| N0100 | BCG2002A | Oxy/LPG acetylene cutting | 24 | Unit of competency |
| N0226 | BCC2005A | Repair pavements | 36 | Unit of competency |
| N0103 | BCG2008A | Use explosive power tools (EPT) | 8 | Unit of competency |
3. ELECTIVES
Three electives from the 3000 series must be achieved.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0253 | BCC3026A | Carry out excavations | 12 | Unit of competency |
| N0249 | BCC3022A | Construct underpinning | 60 | Unit of competency |
| N0275 | BCC3049A | Install piling (bored - cast in place piles) | 40 | Unit of competency |
| N0272 | BCC3046A | Install piling (compressed piles) | 40 | Unit of competency |
| N0273 | BCC3047A | Install piling (driven - cast in place piles) | 40 | Unit of competency |
| N0271 | BCC3045A | Install piling (driven piles) | 40 | Unit of competency |
| N0274 | BCC3048A | Install piling (groutcrete piles) | 40 | Unit of competency |
| N0251 | BCC3024A | Install primary ground support | 24 | Unit of competency |
| N0250 | BCC3023A | Install temporary and permanent rock anchors | 24 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W126 | BCC30403 | Certificate III in Civil Construction (Foundation Work) | Qualification |
VET Info Notes
GENERAL NOTE
Special Note: On 18/10/2002, unit N0216 BCC1005A Use Hand and Power Tools (40 hrs) was substituted in the core for unit N0080 BCG1005A Use Hand and Power Tools (40 hrs). Any learner who has completed N0080 as part of this qualification prior to the end of 2002, should not be disadvantaged in using that unit as part of completion of this award.
This training program is a representation of the qualification BCC30598 taken from the General Construction Training Package which should be consulted for full descriptions of requirements.
1. This qualification is the copyright of The Australian National Training Authority. RTOs who wish
to deliver this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products and Information Service on 18/11/99.
Special Note: On 18/10/2002, unit N0216 BCC1005A Use Hand and Power Tools (40 hrs) was substituted in the core for unit N0080 BCG1005A Use Hand and Power Tools (40 hrs). Any learner who has completed N0080 as part of this qualification prior to the end of 2002, should not be disadvantaged in using that unit as part of completion of this award.
This training program is a representation of the qualification BCC30598 taken from the General Construction Training Package which should be consulted for full descriptions of requirements.
1. This qualification is the copyright of The Australian National Training Authority. RTOs who wish
to deliver this qualification must be registered by their State accrediting body.
2. Further information on this qualification is contained in the Training Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products and Information Service on 18/11/99.
Entry Requirements
No information
Traineeships and Apprenticeships