Qualification Outline
Date retreived
22/07/2026 3:01 PM AWST
22/07/2026 3:01 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in General Construction (Structural Cladding)
Certificate III in General Construction (Structural Cladding)
Qualification
National Code:
BCG30598
BCG30598
State Code:
N016
N016
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
08/10/1998
Approved Date
02/11/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
482
Duration
Unspecified
Current Release Number
1.00
Current Release Date
08/10/1998
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 08/10/1998 | Current | Archived |
Description
Schedule
1. CORE
To obtain this qualification all core competencies plus a minimum of two electives must be achieved.
2. ELECTIVES
Two electives must be achieved from the following Series 3000 electives
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| N0145 | BCG3106A | Erect pre-cast cladding | 40 | Unit of competency |
| N0144 | BCG3102A | Install glazing | 16 | Unit of competency |
| N0143 | BCG3010A | Install windows to wall framing | 8 | Unit of competency |
No information
VET Info Notes
GENERAL NOTE
This training program is a representation of the qualification BCG30598 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCG98 is accredited until 22/10/2001
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Service on 20/8/99.
This training program is a representation of the qualification BCG30598 taken
from the General Construction Training Package which should be consulted for
full descriptions of requirements. BCG98 is accredited until 22/10/2001
1. This qualification is the copyright of The Australian National Training
Authority. RTOs who wish
to deliver this qualification must be registered by their State
accrediting body.
2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the CMS by the Training Products
and Information Service on 20/8/99.
Entry Requirements
No information
Traineeships and Apprenticeships