Qualification Outline
22/07/2026 7:33 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Jewellery Manufacture
Certificate III in Jewellery Manufacture
MEM30803
W048
Deleted
Archived
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 21/10/1998 | Current | Archived |
Description
Schedule
1.
**FOUNDATION**
To meet the requirements of the Training Package qualification, complete all Foundation Units PLUS 20 POINTS of Core Band 1 - listed as Core Requirements; PLUS select 40 POINTS in units drawn from the FABRICATION stream Specialisation Band A units. Units of at least 40 points must be drawn for the field and or units to obtain a particular stream outcome. Pre-requisite units for the selected stream units may be included in the 40 stream points, including where the pre-requisite units are from other fields not included in the chosen stream. Jewellery and Horological Field (All 19 Series),3.1A, 3.2A, 3.6A, 3.7A, 5.6A, 6.7A, 7.24A, 7.32A, 8.1A, 8.2A, 8.3A, 8.10A, 8.11A, 9.1A, 13.2A, 13.3A, 13.4A, 15.4A, 18.1A, 18.2A, 18.3A inclusive PLUS 36 points in units drawn from Specialisation Band A - including dual Band A and Band B units listed below. Total qualification points to equal 96 min - 102 maximum. NEW STUDENTS ENROLLING in or after 2002 must select version B competencies or higher. Lower competency versions are only for continuing students who perviously commenced on the earlier course. RTOs may choose to use higher competency versions in existing programs.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0202 | MEM1.2FA | Apply principles of Occupational Health & Safety in work environment | 1 | Unit of competency |
| M0203 | MEM1.3FA | Apply quality procedures | 1 | Unit of competency |
| M0204 | MEM1.4FA | Plan to undertake a routine task | 1 | Unit of competency |
| M0201 | MEM1.1FA | Undertake interactive workplace communication | 1 | Unit of competency |
2.
**CORE BAND 1** Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0205 | MEM2.1C12A | Apply quality systems | 18 | Unit of competency |
| M0208 | MEM2.4C11A | Assist in the provision of on the job training | 18 | Unit of competency |
| M0209 | MEM2.5C11A | Measure with graduated devices | 18 | Unit of competency |
| M1348 | MEM2.3C11B | Operate in a work based team environment | 18 | Unit of competency |
| M0207 | MEM2.3C11A | Operate in a work based team environment | 18 | Unit of competency |
| M0206 | MEM2.2C11A | Organise and analyse information | 18 | Unit of competency |
| M0212 | MEM2.8C10A | Perform computations | 18 | Unit of competency |
| M0211 | MEM2.7C10A | Perform computations - basic | 18 | Unit of competency |
| M0213 | MEM2.9C10A | Perform computer operations | 18 | Unit of competency |
| M0210 | MEM2.6C10A | Plan a complete activity | 36 | Unit of competency |
3.
**CORE BAND 2**
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0218 | MEM2.15C5A | Operate in an autonomous team environment | 18 | Unit of competency |
| M0216 | MEM2.13C5A | Perform mathematical computations | 36 | Unit of competency |
| M0215 | MEM2.11C5A | Research and prepare presentations and reports | 18 | Unit of competency |
| M0217 | MEM2.14C5A | Use graphical techniques and perform simple statistical computations | 18 | Unit of competency |
| M0214 | MEM2.10C5A | Write reports | 18 | Unit of competency |
4.
SPECIALISED UNITS ASSEMBLY
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0223 | MEM3.4AA | Electronic/electrical assembly (production) | 72 | Unit of competency |
| M0220 | MEM3.1AA | Manual production assembly | 36 | Unit of competency |
| M0221 | MEM3.2AA | Precision assembly | 36 | Unit of competency |
| M0224 | MEM3.5AA | Rework and repair (electrical/electronic production) | 72 | Unit of competency |
| M0225 | MEM3.6AA | Setting assembly stations | 18 | Unit of competency |
| M0226 | MEM3.7AA | Setting multistage continuous process lines | 54 | Unit of competency |
| M0222 | MEM3.3AA | Sheet and plate assembly | 36 | Unit of competency |
5.
CASTING & MOULDING** Units updated. NEW STUDENTS enrollong in or after 2004 must select version B competencies or higher where superceding lower alpha version. MEM4.9AB, MEM4.16AB added November 2003
6.
FABRICATION* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superseding earlier lower alpha version. MEM5.11AB, MEM5.14AB, MEM5.25BB, MEM5.49AB added November 2003
7.
FORGING** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM6.3AB, MEM6.6AB added November 2003
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W0823 | MEM6.3AB | Carry out heat treatment | 54 | Unit of competency |
| M0280 | MEM6.3AA | Carry out heat treatment | 54 | Unit of competency |
| M0282 | MEM6.5AA | Drop and upset forging | 36 | Unit of competency |
| M0279 | MEM6.2AA | Hammer forging | 36 | Unit of competency |
| M0278 | MEM6.1AA | Hand forging | 36 | Unit of competency |
| M0284 | MEM6.7AA | Perform basic incidental heat/quenching, tempering and annealing | 18 | Unit of competency |
| M0281 | MEM6.4AA | Select heat treatment processes and test finished product | 54 | Unit of competency |
| M0283 | MEM6.6AA | Spring repair | 36 | Unit of competency |
| W0824 | MEM6.6AB | Spring repair | 36 | Unit of competency |
8.
MACHINE & PROCESS OPERATIONS* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superseding earlier lower alpha versions. **Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM7.16AB, MEM7.18AB, MEM7.19AB, MEM7.20AB, MEM7.22AB, MEM7.23BB, MEM7.30AB, MEM7.31AB added November 2003
9.
SURFACE FINISHING** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM8.2AB, MEM8.3AB, MEM8.9AB, MEM8.18AA, MEM8.19AA, MEM8.20AA added November 2003
10.
DRAWING, DRAFTING & DESIGN* Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0343 | MEM9.11AA | Apply basic engineering design concepts | 54 | Unit of competency |
| M0337 | MEM9.5AA | Basic Engineering detail drafting | 72 | Unit of competency |
| M1773 | MEM9.9BB | Create 2D drawings using computer aided design system | 72 | Unit of competency |
| M1774 | MEM9.10BB | Create 3D models using computer aided design system | 36 | Unit of competency |
| M0333 | MEM9.1AA | Draw and interpret sketch | 18 | Unit of competency |
| M0334 | MEM9.2AA | Interpret technical drawing | 36 | Unit of competency |
| M0335 | MEM9.3AA | Prepare basic engineering drawing | 72 | Unit of competency |
11.
INSTALLATION & COMMISSIONING* Units updated.** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM10.1AB, MEM10.7BB added November 2003
12.
MATERIALS & HANDLING* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superseding earlier lower alpha versions.
13.
MEASUREMENT* Units updated.** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM12.7AB added November 2003
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0378 | MEM12.2AA | Electrical/electronic measurement | 18 | Unit of competency |
| M0382 | MEM12.6AA | Mark off/out (general engineering) | 36 | Unit of competency |
| W0841 | MEM12.7AB | Mark off/out structural fabrications and shapes | 36 | Unit of competency |
| M0383 | MEM12.7AA | Mark off/out structural fabrications and shapes | 36 | Unit of competency |
| M1779 | MEM12.19AA | Measure components using coordinate measuring machine | 36 | Unit of competency |
| M0380 | MEM12.4AA | Precision electrical/electronic measurement | 36 | Unit of competency |
| M0379 | MEM12.3AA | Precision mechanical measurement | 18 | Unit of competency |
| M1781 | MEM12.21AA | Program coordinate measuring machine | 36 | Unit of competency |
| M1782 | MEM12.22AA | Program coordinate measuring machine (advanced) | 18 | Unit of competency |
| M1780 | MEM12.20AA | Set and operate coordinate measuring machine | 18 | Unit of competency |
| M0377 | MEM12.1AA | Use comparison and basic measuring devices | 18 | Unit of competency |
14.
OCCUPATIONAL HEALTH & SAFETY* Units updated.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0390 | MEM13.7AA | Maintain water cooling towers and treatment systems | 18 | Unit of competency |
| M0389 | MEM13.6AA | Monitor Occupational Health & Safety factors for enterprise or section of enterprise | 36 | Unit of competency |
| M0384 | MEM13.1AA | Perform emergency first aid | 9 | Unit of competency |
| M0385 | MEM13.2AA | Undertake Occupational Health & Safety activities in the workplace | 27 | Unit of competency |
| M0386 | MEM13.3AA | Work safely with industrial chemicals and materials | 18 | Unit of competency |
| M1483 | MEM13.13AA | Work safely with ionizing radiation | 36 | Unit of competency |
| M0387 | MEM13.4AA | Work safely with molten metals/glass | 18 | Unit of competency |
15.
PLANNING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0391 | MEM14.1BA | Schedule material deliveries | 72 | Unit of competency |
| M0393 | MEM14.3BA | Undertake basic production scheduling | 72 | Unit of competency |
16.
QUALITY* Units updated ** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM15.20BB, MEM15.21BB added November 2003
17.
COMMUNICATION* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superseding earlier lower alpha versions.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1792 | MEM16.2AB | Participate in formal interviews and negotiations | 36 | Unit of competency |
| M0405 | MEM16.2AA | Participate in formal interviews and/or negotiations | 36 | Unit of competency |
| M0407 | MEM16.4AA | Perform internal/external customer service | 18 | Unit of competency |
18.
TRAINING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M0408 | MEM17.1AA | Assist in development and deliver training in the workplace | 18 | Unit of competency |
| M0409 | MEM17.2AA | Conduct workplace assessment | 18 | Unit of competency |
19.
MAINTENANCE & DIAGNOSTICS* Units updated. NEW STUDENTS enrolling in or after 2002 must select version B competencies or higher where superseding earlier lower alpha versions. ** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM18.17BB, MEM18.28AB, MEM18.58AB, MEM18.70BB added November 2003
20.
JEWELLERY** Units updated. NEW STUDENTS enrolling in or after 2004 must select version B competencies or higher where superseding lower alpha version. MEM19.16AA, MEM19.17AA, MEM18.18AA, MEM19.20AA, MEM19.21AA, MEM19.22AA added November 2003
21.
NON-DESTRUCTIVE TESTING
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| M1496 | MEM24.12AA | Apply metallurgy principles | 36 | Unit of competency |
| M1495 | MEM24.11BA | Establish non-destructive tests | 108 | Unit of competency |
| M1489 | MEM24.3AA | Perform basic magnetic particle testing | 18 | Unit of competency |
| M1487 | MEM24.1AA | Perform basic penetrant testing | 18 | Unit of competency |
| M1493 | MEM24.9AA | Perform basic radiographic testing | 18 | Unit of competency |
| M1718 | MEM24.4AA | Perform magnetic particle testing | 36 | Unit of competency |
| M1488 | MEM24.2AA | Perform penetrant testing | 36 | Unit of competency |
| M1494 | MEM24.10AA | Perform radiographic testing | 54 | Unit of competency |
| M1492 | MEM24.8AA | Perform ultrasonic testing | 54 | Unit of competency |
| M1491 | MEM24.7AA | Perform ultrasonic thickness testing | 18 | Unit of competency |
22.
MARINE CRAFT CONSTRUCTION
23.
Select these modules to cover areas not covered by the MERSITAB competency standards. These modules do not have points allocated to them but offer underpinning knowledge to achieve competence for units within the Training Package.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| 88062 | NF15 | Material Science (98) | 36 | Module |
| 86917 | NF075 | Welding Metallurgy | 36 | Module |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W241 | MEM30605 | Certificate III in Jewellery Manufacture | Qualification |
VET Info Notes
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN on 28/11/2003. The outline was subsequently modified as an adaptation to the Jewellery Manufacture Pathway on 7 June 2005.
Entry Requirements
No information
Traineeships and Apprenticeships