Qualification Outline

Date retreived
23/07/2026 6:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Electrotechnology Entertainment and Servicing

Certificate III in Electrotechnology Entertainment and Servicing

Qualification
National Code:
UTE30799
State Code:
M031
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
21/07/1999
Approved Date
18/01/2001
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
A
Nominal Hours
900
Duration
Unspecified
Current Release Number
1.00
Current Release Date
21/07/1999
VET Act Conditions
Releases
Release Version Release Date TGA Status DTWD Status
1.00 21/07/1999 Current Archived
Description
Schedule
1. CORE

Reference should be made to the non endorsed electrotechnology competencies mapping against modules. The outcomes of the modules will assist with meeting the requirements of the competencies. Holistic delivery and management of the funded hours must ensure the 900 hours for the total program is not exceeded. The hours allocated against each competency in this program are related to assessments and reporting. The underpinning knowledge and skills indicated in the groups are to be completed prior to the assessment and reporting.

State Code National Code Title Hours Type
M0743 UTENES501CA Diagnose and rectify faults in apparatus & circuits (Electronics) 5 Unit of competency
M0545 UTENES105GA Install & terminate wiring systems (Cabling/wiring support & protection) 4 Unit of competency
M0547 UTENES105IA Install & terminate wiring systems (Power & control - extra low voltage) 5 Unit of competency
M0552 UTENES106CA Install electrical/electronic apparatus (Electronics) 5 Unit of competency
M0593 UTENES206CA Maintain & repair apparatus & circuits (Electronics) 5 Unit of competency
M0508 UTENES009A Participate in the training of others 7 Unit of competency
M0685 UTENES402CA Test apparatus & circuits (Electronics) 5 Unit of competency
M0653 UTENES301CA Undertake commissioning of apparatus & circuits (Electronics) 5 Unit of competency
2. ELECTIVE

1. Learners undertaking UTENES105GA will be required to complete the underpinning knowledge and skills listed below. These must be completed prior to the final assessment in UTENES105GA.

State Code National Code Title Hours Type
87549 NE172 Electrical Wiring and Equipment 1 18 Module
87530 NBB02 Occupational Health and Safety 18 Module
87529 NE175 Workshop Practices 36 Module
3. ELECTIVE

1. Learners undertaking UTENES105IA will be required to complete the underpinning knowledge and skills listed below. These must be completed prior to the final assessment in UTENES105IA.

State Code National Code Title Hours Type
90070 NUE52 Applied Electricity 1 36 Module
87549 NE172 Electrical Wiring and Equipment 1 18 Module
90165 NUE154 Electronic Fault Finding 18 Module
43625 NE184 Electronic Hand Soldering Technology 36 Module
90236 NUE506 Electronic Systems Safety 18 Module
87530 NBB02 Occupational Health and Safety 18 Module
87529 NE175 Workshop Practices 36 Module
4. ELECTIVE

1. Learners undertaking UTENES106CA will be required to complete the underpinning knowledge and skills listed below. These must be completed prior to the final assessment in UTENES106CA.

State Code National Code Title Hours Type
86951 NE008 Amplifier Applications 36 Module
90070 NUE52 Applied Electricity 1 36 Module
90071 NUE54 Applied Electricity 2 36 Module
90073 NUE56 Applied Electricity 4 36 Module
86979 NE039 Communications Fundamentals 36 Module
43633 NE179 Digital Electronics 1 36 Module
43621 NE180 Digital Electronics 2 36 Module
90254 NUE703 Digital Sub-systems 18 Module
87549 NE172 Electrical Wiring and Equipment 1 18 Module
90165 NUE154 Electronic Fault Finding 18 Module
43625 NE184 Electronic Hand Soldering Technology 36 Module
90236 NUE506 Electronic Systems Safety 18 Module
90169 NUE158 Intro to Resonance, Filters and Oscillators 36 Module
87530 NBB02 Occupational Health and Safety 18 Module
87529 NE175 Workshop Practices 36 Module
5. ELECTIVE

Learners undertaking UTENES206CA, UTENES301CA, UTENES402CA and UTENES501CA will be required to complete the underpinning knowledge and skills listed. These must be completed prior to the final assessment in UTENES206CA, UTENES301CA, UTENES402CA and UTENES501CA.

State Code National Code Title Hours Type
86951 NE008 Amplifier Applications 36 Module
43628 NE182 Amplifiers 1 36 Module
43629 NE183 Amplifiers 2 36 Module
90070 NUE52 Applied Electricity 1 36 Module
90071 NUE54 Applied Electricity 2 36 Module
90073 NUE56 Applied Electricity 4 36 Module
86979 NE039 Communications Fundamentals 36 Module
43630 NE178 Dc Power Supplies 36 Module
43633 NE179 Digital Electronics 1 36 Module
43621 NE180 Digital Electronics 2 36 Module
90254 NUE703 Digital Sub-systems 18 Module
87549 NE172 Electrical Wiring and Equipment 1 18 Module
90165 NUE154 Electronic Fault Finding 18 Module
43625 NE184 Electronic Hand Soldering Technology 36 Module
90236 NUE506 Electronic Systems Safety 18 Module
90169 NUE158 Intro to Resonance, Filters and Oscillators 36 Module
90134 NUE113 Linear and Switchmode Power Supply 36 Module
86960 NE018 Microprocessor Fundamentals 54 Module
87530 NBB02 Occupational Health and Safety 18 Module
87529 NE175 Workshop Practices 36 Module
6. ELECTIVES

Select one of the elective units. The elective units do not have any off-the-job component and will be assessed as on-the -job.

State Code National Code Title Hours Type
M0501 UTENES002A Attend to breakdown 20 Unit of competency
M0504 UTENES005A Coordinate materials 20 Unit of competency
M0507 UTENES008A Provide technical leadership in the workplace 20 Unit of competency
M0506 UTENES007A Supply projects 20 Unit of competency
7. ELECTIVE

SPECIALISATION Optional Units: 1. A further selection can be made by choosing one further unit/group per specialisation if required. Note: The specialisation selected to maximum of 177 hours and must be within the funded hours of 900 hours. 2. Learners not undertaking one of the specialisation's will be required to complete the underpinning knowledge and skills listed in group 5.

State Code National Code Title Hours Type
M0612 UTENES209QA Attach flexible cords & plugs to electrical equipment 250 volt supply (Control Devices) 5 Unit of competency
M0611 UTENES209RA Attach flexible cords & plugs to electrical equipment 250 volt supply (Electrical Heaters) 5 Unit of competency
M0610 UTENES209SA Attach flexible cords & plugs to electrical equipment 250 volt supply (Motors) 5 Unit of competency
M0614 UTENES209NA Attach flexible cords & plugs to electrical equipment 250 volt supply (Pre-Assembled Neon Signs) 5 Unit of competency
M0613 UTENES209PA Attach flexible cords & plugs to electrical equipment 250 volt supply (Single Enclosed C/Device) 5 Unit of competency
8. ELECTIVE

Audio - Analog. Select up to a maximum of 172 hours.

State Code National Code Title Hours Type
87390 NE095 Am and Fm Tuners Principles and Servicing 36 Module
90170 NUE160 Consumer Audio Electronics 36 Module
90122 NUE101 Intro to Television 36 Module
87393 NE098 Loud Speakers and Microphones 36 Module
87389 NE094 Professional Audio Electronics 36 Module
87047 NE091 Sound and Acoustics 18 Module
87391 NE096 Tape Recorders-audio 54 Module
9. ELECTIVE

Audio-Digital. Select up to a maximum of 172 hours.

State Code National Code Title Hours Type
87390 NE095 Am and Fm Tuners Principles and Servicing 36 Module
87248 NE99 Compact Disk Player Principles and Servicing 36 Module
90170 NUE160 Consumer Audio Electronics 36 Module
87249 NE100 Digital Audio Fundamentals 18 Module
87393 NE098 Loud Speakers and Microphones 36 Module
87047 NE091 Sound and Acoustics 18 Module
90295 NUE801 Television Antenna Systems 36 Module
10. ELECTIVE

Video. Select up to a maximum of 172 hours.

State Code National Code Title Hours Type
90123 NUE102 Chrominance and Luminance 36 Module
90122 NUE101 Intro to Television 36 Module
90125 NUE104 Powersupplies-tv and Vcr 36 Module
90124 NUE103 Scanning and Deflection 36 Module
90295 NUE801 Television Antenna Systems 36 Module
90129 NUE107 Television Rf Stages 36 Module
11.

Electronic Appliances. Select up to a maximum of 172 hours. Note: this option is not avaliable to apprentices in WA.

State Code National Code Title Hours Type
90123 NUE102 Chrominance and Luminance 36 Module
90122 NUE101 Intro to Television 36 Module
90343 NUE804 Microwave Appliance 36 Module
90125 NUE104 Powersupplies-tv and Vcr 36 Module
90124 NUE103 Scanning and Deflection 36 Module
90129 NUE107 Television Rf Stages 36 Module
Replaces
State Code National Code Title Type
3114 7891 Certificate III in Electronic Servicing Accredited course
Replaced By
State Code National Code Title Type
W079 UTE30702 Certificate III in Electrotechnology Entertainment and Servicing Qualification
VET Info Notes
This training program is a representation of the qualification UTE30799 taken
from the Electrotechnology Training Package UTE99 which should be consulted for
full descriptions of requirements. UTE99 is accredited until 30/06/2002.

1. This qualification is the copyright of The Australian National Training
Authority.

2. Further information on this qualification is contained in the Training
Package available from Australian
Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the CMS by the Midland College of
TAFE. This document was amended on the 07/01/03 by Swan TAFE EMCSSN and included updating the underpinning knowledge. NE029 was deleted from group 05, NUE154 and 506 from group 02, NE008, NE039, NUE054 and NUE158 added to group 04 and 05. NE101 added to group 09 and NUE801 to group 10. Group 11 was added to the structure.
Entry Requirements
No information
Traineeships and Apprenticeships
No information