Qualification Outline
Date retreived
22/07/2026 12:50 AM AWST
22/07/2026 12:50 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Gas Fitting
Certificate III in Gas Fitting
Qualification
National Code:
BCP30403
BCP30403
State Code:
W073
W073
TGA Status:
Deleted
Deleted
DTWD Status:
Replaced
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0403 - Building
Original TGA Release Date
02/02/2009
Approved Date
09/11/2005
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
474
Duration
4 Semesters
Current Release Number
1.00
Current Release Date
02/02/2009
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 02/02/2009 | Current | Approved |
Description
Schedule
Pathways
| State Code | Title |
|---|---|
| WS29 | Energy Safety Class G Gasfitting Permit for Non-apprentices |
1.
CORE
The following units of competence must be achieved.
2.
ELECTIVES
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W1258 | BCPCM2009A | Cut with oxy-LPG/acetylene | 8 | Unit of competency |
| W1265 | BCPCM3003A | Fabricate and install non-ferrous pressure piping | 8 | Unit of competency |
| W2758 | BCPMS3001A | Fabricate and install steel pressure piping | 52 | Unit of competency |
| W2755 | BCPGS3015A | Install subsidiary gas meters | 4 | Unit of competency |
| W1264 | BCPCM3002A | Weld polyethylene (PE) pipe using fusion method | 8 | Unit of competency |
3.
Other ELECTIVE units of competence that may be considered as an alternative to the Group 02 electives.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| W603 | CPC32708 | Certificate III in Gas Fitting | Qualification |
VET Info Notes
This training program is a representation of the qualification code BCP30403 taken from the Plumbing and Services Industry Training Package BCP03 which should be consulted for full description of requirements. BCP30403 is endorsed until 30 November 2006.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN (TAFEWA Swan) on 14 September 2005.
1. This qualification is the copyright of The Australian National Training Authority.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by the METS CSSN (TAFEWA Swan) on 14 September 2005.
Entry Requirements
No information
Traineeships and Apprenticeships