Pathway Outline
Date retreived
22/07/2026 4:45 AM AWST
22/07/2026 4:45 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Energy Safety Class G Gasfitting Permit for Non-apprentices
Energy Safety Class G Gasfitting Permit for Non-apprentices
Pathway
National Code
—
—
State Code
WS29
WS29
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
Original TGA Release Date
02/02/2009
02/02/2009
Field of Education
0403 - Building
0403 - Building
Approved Date
09/11/2005
09/11/2005
Stream of Study
Initial Vocational (3100 - 3600)
Initial Vocational (3100 - 3600)
Duration
2 Semesters
Current Release Version
1.00
1.00
Current Release Date
02/02/2009
02/02/2009
Nominal Hours
648
648
Description
This is a pathway implementation of the Training Package qualification BCP30403. Completion of this training program will enable non-apprentices to meet the requirements of Energy Safety Class G Gasfitting Permit.
Packaging Rules
1. Mandatory core units
All (26) units below must be completed
2. Gas install only unit
The following unit must be completed to achieve the requirements for a Class G Install Only Gas license:
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2756 | BCPGS4001A | Plan, size and layout consumer gas installations | 24 | Unit of competency |
3. Gas install and service unit
The following unit must be completed to achieve the requirements for a full Class G Gas license (Installation and Servicing):
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2792 | BCPGS4002A | Service Type A gas appliances | 150 | Unit of competency |
4. Mandatory Electives
The following electives are from the Training Package Qualification are required by EnergySafety for licensing purposes :
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2755 | BCPGS3015A | Install subsidiary gas meters | 4 | Unit of competency |
| W2792 | BCPGS4002A | Service Type A gas appliances | 150 | Unit of competency |
5. Elective units
Complete the elective units as suggested below. Refer to the Plumbing and Services Training Package (BCP03) for choice of other electives.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W1258 | BCPCM2009A | Cut with oxy-LPG/acetylene | 8 | Unit of competency |
| W1265 | BCPCM3003A | Fabricate and install non-ferrous pressure piping | 8 | Unit of competency |
| W2758 | BCPMS3001A | Fabricate and install steel pressure piping | 52 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 0582 | 50572 | Course In Gas Fitting Type A Appliances | Accredited course |
Note
1. This training program has been created as a pathway of the Training Package qualification BCP30403 Certificate III in Gas Fitting on 20/8/2008.
2. This qualification/pathway is the copyright of DEST and should be consulted for full description of requirements
3. Further information on this training program may be obtained from the Executive Officer of METS CSSN, Tel: (08) 9442 8356.
4. Course outline was amended on 16/6/2009 to distinguish the 2 Gas installation units under the regulatory requirements. Also two electives BCPGS3015A and BCPCM3002A, are now mandatory as required by Energy Safety.
2. This qualification/pathway is the copyright of DEST and should be consulted for full description of requirements
3. Further information on this training program may be obtained from the Executive Officer of METS CSSN, Tel: (08) 9442 8356.
4. Course outline was amended on 16/6/2009 to distinguish the 2 Gas installation units under the regulatory requirements. Also two electives BCPGS3015A and BCPCM3002A, are now mandatory as required by Energy Safety.
No information