Qualification Outline
Date retreived
22/07/2026 6:23 AM AWST
22/07/2026 6:23 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Printing and Graphic Arts (Desktop Publishing)
Certificate II in Printing and Graphic Arts (Desktop Publishing)
Qualification
National Code:
ICP20199
ICP20199
State Code:
C232
C232
TGA Status:
Deleted
Deleted
DTWD Status:
Archived
Archived
National Endorsed, State Implementation and Classification
Field of Education
1005 - Graphic And Design Studies
Original TGA Release Date
18/01/1999
Approved Date
18/01/1999
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
390
Duration
1 Semester
Current Release Number
1.00
Current Release Date
18/01/1999
VET Act Conditions
—
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 18/01/1999 | Current | Archived |
Description
Schedule
1. CORE
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C3404 | ICPSU62AA | Communicate in the workplace | 30 | Unit of competency |
| C3261 | ICPKN11A | Demonstrate knowledge and requirements of graphic pre-press | 1 | Unit of competency |
| C3292 | ICPPP11BA | Develop a basic design concept | 30 | Unit of competency |
| C3303 | ICPPP32CA | Electronically combine and assemble data | 60 | Unit of competency |
| C3402 | ICPSU61AA | Follow OH&S practices and identify environmental hazards | 30 | Unit of competency |
| C3383 | ICPSU16AA | Inspect quality against required standards | 30 | Unit of competency |
| C3307 | ICPPP52BA | Output images to film and paper | 30 | Unit of competency |
| C3406 | ICPSU63BA | Perform basic industry calculations | 30 | Unit of competency |
| C3296 | ICPPP22BA | Scan a line image | 30 | Unit of competency |
| C3293 | ICPPP21BA | Select and apply type | 30 | Unit of competency |
| C3409 | ICPSU81BA | Use computer systems | 30 | Unit of competency |
2. ELECTIVES
ALL THE ABOVE UNITS OF COMPETENCE PLUS A SELECTION OF TWO C LEVEL OR FOUR B LEVEL COMPETENCIES TO A MAXIMUM OF 390 HOURS
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C1033 | ICPPP11CA | Develop a detailed design concept | 30 | Unit of competency |
| C3294 | ICPPP21CA | Produce a typographic image | 50 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| 3275 | 7286 | Certificate III in Desktop Publishing | Accredited course |
| 3432 | 13321SA | Certificate II in Vocational Education - Printing Trades | Accredited course |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C823 | ICP20205 | Certificate II in Printing and Graphic Arts (Desktop Publishing) | Qualification |
VET Info Notes
GENERAL NOTES
1. This qualification is a representation of the qualification ICP20199
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP 20199 endorsed till the 28/02/2002.
2. This qualification is the copyright of The Australian National
Training Authority. RTOs who
wish to deliver this qualification must be registered by their
State accrediting body.
3. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Ltd., Tel: (03) 9639 9836.
4. This course was entered on to the CMS by Central TAFE on 07/12/2000.
1. This qualification is a representation of the qualification ICP20199
taken from the Printing and
Graphic Arts Training Package which should be consulted for full
descriptions of its requirements.
ICP 20199 endorsed till the 28/02/2002.
2. This qualification is the copyright of The Australian National
Training Authority. RTOs who
wish to deliver this qualification must be registered by their
State accrediting body.
3. Further information on this qualification is contained in the
Training Package available from
Australian Training Products Ltd., Tel: (03) 9639 9836.
4. This course was entered on to the CMS by Central TAFE on 07/12/2000.
Entry Requirements
No information
Traineeships and Apprenticeships
(TR02630) DESKTOP PUBLISHING (LEVEL 2)
Traineeship