Qualification Outline

Date retreived
22/07/2026 5:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in ESI - Power Systems Network Infrastructure

Certificate IV in ESI - Power Systems Network Infrastructure

Qualification
National Code:
UET40612
State Code:
J169
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
14/03/2013
Approved Date
29/10/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
1206
Duration
3 Semesters
Current Release Number
2.00
Current Release Date
14/03/2013
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 14/03/2013 Current Approved
Description

Scope:
This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an ‘Electrician’s licence’. It’s also provide acquire skills and knowledge needed for a career in installation and maintenance of network infrastructure, namely, Transmission, Distribution or Rail Traction in the Electricity Supply Industry.

Schedule
Packaging Rules
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All twenty two (22) core competency standard units, and
- A combination of elective competency standard units to achieve a total weighting of 340 points in accordance with the Elective Competency Standard Units table below.
- All the required prerequisite competency standard units have been met.

Group A Elective Units
- a maximum of 50 weighting point may be chosen
- Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Group B Elective Units
- a maximum of 140 weighting point may be chosen

Group C Elective Units
- all the elective units may be selected from Group C; a minimum of 200 to a maximum of 340 weighting points
1. Core Units

All twenty two (22) units must be completed

State Code National Code Title Hours Type
WC711 UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7317 UEENEEG063A Arrange circuits, control and protection for general electrical installations 36 Unit of competency
S7326 UEENEEG109A Develop and connect electrical control circuits 72 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WD689 UETTDRIS63A Implement and monitor the power system environmental and sustainable energy management policies and procedures 27 Unit of competency
WD688 UETTDRIS62A Implement and monitor the power system organisational OHS policies, procedures and programs 27 Unit of competency
S8321 UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations 18 Unit of competency
S7320 UEENEEG103A Install low voltage wiring and accessories 18 Unit of competency
S7324 UEENEEG107A Select wiring systems and cables for low voltage general electrical installations 54 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7316 UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 54 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7325 UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
S7322 UEENEEG105A Verify compliance and functionality of low voltage general electrical installations 36 Unit of competency
WD654 UETTDREL16A Working safely near live electrical apparatus 18 Unit of competency
2. Group A Imported and Common Elective Units

A maximum of 50 weighting points may be chosen from Group A.
Please refer to the training package for the full list of unit weighting points.

State Code National Code Title Hours Type
D1030 BSBWOR401A Establish effective workplace relationships 40 Unit of competency
D0843 BSBMGT403A Implement continuous improvement 50 Unit of competency
D0842 BSBMGT402A Implement operational plan 50 Unit of competency
D0754 BSBINM401A IMPLEMENT WORKPLACE INFORMATION SYSTEM 40 Unit of competency
D1031 BSBWOR402A Promote team effectiveness 40 Unit of competency
3. Group B Elective Units

A maximum of 140 weighting points may be chosen from Group B.
Please refer to the training package for the full list of unit weighting points.

State Code National Code Title Hours Type
S7328 UEENEEG171A Install, set up and commission interval metering 18 Unit of competency
WD670 UETTDRIS44A Perform HV field switching operation to a given schedule 45 Unit of competency
WD669 UETTDRIS43A Perform low voltage field switching operation to a given schedule 45 Unit of competency
WD748 UETTDRSB39A Perform power system substation switching operation to a given schedule 45 Unit of competency
WD673 UETTDRIS47A Sample, test, filter and reinstate insulating oil 36 Unit of competency
WD693 UETTDRIS67A Solve problems in energy supply network equipment 72 Unit of competency
WD694 UETTDRIS68A Solve problems in energy supply network protection equipment and systems 36 Unit of competency
4. Group C Elective Units

A minimum of 200 to a maximum of 340 weighting points to be chosen from Group C.
Please refer to the training package for the full list of unit weighting points.

State Code National Code Title Hours Type
WD677 UETTDRIS51A Coordinate and direct power system switching schedules 54 Unit of competency
WD676 UETTDRIS50A Coordinate power system permit procedures 54 Unit of competency
WD674 UETTDRIS48A Develop high voltage switching schedule 54 Unit of competency
WD675 UETTDRIS49A Develop low voltage switching schedule 81 Unit of competency
WD619 UETTDRDP15A Inspect, maintain and restore energised low voltage overhead distribution network infrastructure 45 Unit of competency
WD672 UETTDRIS46A Install and maintain ESI network infrastructure electrical equipment 36 Unit of competency
WD613 UETTDRCJ34A Install and maintain network infrastructure HV underground cables 45 Unit of competency
WD612 UETTDRCJ33A Install and maintain network infrastructure LV underground cables 36 Unit of competency
WD727 UETTDRRT35A Install and maintain traction network equipment and components 36 Unit of competency
WD726 UETTDRRT34A Install and maintain traction network wiring systems 36 Unit of competency
WD801 UETTDRTS38A Install and replace high voltage metering and associated equipment 36 Unit of competency
S7433 UEENEEG076A Install and replace low voltage current transformer metering 18 Unit of competency
WD781 UETTDRTP34A Install/maintain overhead transmission network infrastructure 36 Unit of competency
WD782 UETTDRTP35A Install/maintain transmission network infrastructure electrical equipment 36 Unit of competency
WD729 UETTDRRT37A Maintain traction network equipment and components 36 Unit of competency
WD728 UETTDRRT36A Maintain traction network wiring systems 36 Unit of competency
WD800 UETTDRTS37A Perform current injection testing using phantom load 36 Unit of competency
WD671 UETTDRIS45A Perform power system substation switching operation to a given schedule 36 Unit of competency
Replaces
State Code National Code Title Type
W723 UET40309 Certificate IV in ESI - Network Infrastructure Qualification
Replaced By
State Code National Code Title Type
BEV3 UET40619 Certificate IV in ESI - Power Systems Network Infrastructure Qualification
VET Info Notes
Supersedes and is equivalent to UET40309.
Entry Requirements

Not applicable.

Traineeships and Apprenticeships
No information