Qualification Outline

Date retreived
22/07/2026 6:32 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Textile Fabrication

Certificate III in Textile Fabrication

Qualification
National Code:
LMT30406
State Code:
W287
TGA Status:
Deleted
DTWD Status:
Archived
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
10/02/2000
Approved Date
15/10/2007
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
600
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
10/02/2000
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 10/02/2000 Current Archived
Description
Schedule
1.

Ten (10) units of competency are required to complete this qualification, in addition to the required units of competency from Certificate II in Textile Fabrication.

1. At least six (6) units must be selected from the Production field as listed in Certificate II in Textile Fabrication.
2. Four (4) units may be selected form any field aligned to:
-Certificate III in Textile Fabrication and/or
-Certificate II, III or IV from another TCF Training Qualification and/or
-Certificate II, III or IV from another Training Package Qualification.
3. For units identified by an asterisk, competence in the corresponding unit(s) at the lower level(s) or relelvant underpinning knowledge and skills associated with these units will be acquired as part of the training program. (Refer to the Corresponding units Table at the front of this volume.)
4. Units imported from other Training Package qualifications may have prerequisites and these must be taken into account when developing a training program.
5. A unit of competency chosen from outside the TCF Training Package should be consistent with the Competency Profile relevant to the trainee and/or the enterprise (see Users Guide for examples) and must not have been achieved at a lower level qualification.

CORE UNITS from Certificate I in Textile Fabrication

State Code National Code Title Hours Type
W6581 LMTGN2002A Apply quality standards 30 Unit of competency
W6580 LMTGN2001A Follow defined OH&S policies and procedures 20 Unit of competency
2.

ELECTIVE UNITS from Certificate I in Textile Fabrication

State Code National Code Title Hours Type
E0952 LMTPRTF01AA Identify and handle materials 20 Unit of competency
E0953 LMTPRTF02AA Lay out 20 Unit of competency
E0954 LMTPRTF05AA Operate and maintain sewing machine - 1 24 Unit of competency
3.

PRODUCT ELECTIVES from Certificate II in Textile Fabrication

State Code National Code Title Hours Type
E0960 LMTPDTF01AA Translate information into measurements and/or diagrams - 1 24 Unit of competency
4.

PRODUCTION ELECTIVES from Certificate II in Textile Fabrication

State Code National Code Title Hours Type
E0972 LMTPRTF08AA Add accessories - 1 20 Unit of competency
E0967 LMTPRTF03AA Cut and shape - 1 24 Unit of competency
E0965 LMTPRTF01BA Identify and select materials - 1 40 Unit of competency
E0979 LMTPRTF15AA Inspect product - 1 20 Unit of competency
E0978 LMTPRTF14A Use hand tools 24 Unit of competency
5.

HUMAN RESOURCES ELECTIVES from Certificate II in Textile Fabrication

State Code National Code Title Hours Type
W6583 LMTGN2004A Work in a team environment 30 Unit of competency
6.

PRODUCT DEVELOPMENT ELECTIVES from Certificate III in Textile Fabrication

State Code National Code Title Hours Type
E1900 LMTPDTF05A Estimate and cost job 40 Unit of competency
E1899 LMTPDTF04BA Identify customer requirements and gain customer acceptance 40 Unit of competency
E1922 LMTPDTF02BA Measure, scale and undertake geometric construction - 2 60 Unit of competency
E1923 LMTPDTF03BA Produce patterns for three dimensional products 40 Unit of competency
7.

PRODUCTION ELECTIVES from Certificate III in Textile Fabrication

State Code National Code Title Hours Type
E1901 LMTPRTF01CA Identify and select materials - 2 20 Unit of competency
E0982 LMTPRTF18A Provide customer service 20 Unit of competency
8.

PRODUCT DEVELOPMENT AQF Level II Electives

State Code National Code Title Hours Type
E0963 LMTPDTF04AA Identify customer requirements (on site) 20 Unit of competency
E0961 LMTPDTF02AA Measure, scale and undertake geometric construction - 1 20 Unit of competency
E0962 LMTPDTF03AA Produce patterns for two dimensional products 20 Unit of competency
9.

PRODUCTION AQF Level II Electives

State Code National Code Title Hours Type
E0969 LMTPRTF05BA Operate and maintain sewing machine - 2 24 Unit of competency
Replaces
State Code National Code Title Type
E220 LMT30400 Certificate III in Textile Fabrication Qualification
Replaced By
State Code National Code Title Type
W370 LMT30407 Certificate III in Textile Fabrication Qualification
VET Info Notes
This training program is a representation of the qualification code LMT30406 taken from the Textiles, Clothing and Footwear Training Package LMT00 which should be consulted for full description of requirements.

1. This qualification is the copyright of the Department of Education, Science and Training.

2. Further information on this qualification is contained in the Training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.

3. This qualification was entered on to the STARS by the VET Teaching & Learning Directorate of the WA Department of Education and Training on 25/5/2007.
Entry Requirements
No information
Traineeships and Apprenticeships
No information