Qualification Outline
22/07/2026 4:29 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Printing and Graphic Arts (Print Finishing)
Certificate III in Printing and Graphic Arts (Print Finishing)
ICP30710
W778
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 05/07/2010 | Current | Approved |
Description
Descriptor
This qualification applies to individuals working as a binder and finisher in the printing and graphic arts industry. Binders and finishers assemble, bind and cover books, other publications and printed products by hand or machine. They are responsible for post-press and finishing stages of the print process and apply solutions to a defined range of unpredictable problems and may provide leadership and guidance to others with some limited responsibility for the output of others.
Job Roles
Binder and finisher
Schedule
Packaging Rules
Total number of units = 214 core units plus;
8 elective units from Group A plus;
9 elective units from Group B
Up to two elective units from Group A can be substituted with Group B elective units listed in the ICP30710 qualification outline.
Seven elective units must be selected from Group B.
Up to two Group B elective units may be selected from the remaining elective units or from qualifications at the same level or one level higher, in this or any other endorsed Training Package or accredited course.
Elective units must be relevant to the qualification, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.
1. Core Units
All four units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3258 | ICPSU262C | Communicate in the workplace | 50 | Unit of competency |
| D1022 | BSBSUS301A | Implement and monitor environmentally sustainable work practices | 40 | Unit of competency |
| D3247 | ICPSU216C | Inspect quality against required standards | 30 | Unit of competency |
| D3256 | ICPSU260C | Maintain a safe work environment | 30 | Unit of competency |
2. Group A Elective Units
Eight units to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3088 | ICPKN313C | Apply knowledge and requirements of the converting, binding and finishing sector | 60 | Unit of competency |
| D3244 | ICPSU208C | Operate and monitor machines (basic) | 30 | Unit of competency |
| D3250 | ICPSU224C | Perform basic machine maintenance | 30 | Unit of competency |
| D3269 | ICPSU352C | Plan operational processes | 50 | Unit of competency |
| D3242 | ICPSU203C | Prepare and maintain the work area | 60 | Unit of competency |
| D3243 | ICPSU207C | Prepare machine for operation (basic) | 30 | Unit of competency |
| D3241 | ICPSU202C | Prepare, load and unload product on and off machine | 20 | Unit of competency |
| D3268 | ICPSU351C | Undertake basic production scheduling | 50 | Unit of competency |
3. Group B Elective Units
Nine units to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3265 | ICPSU323C | Dispose of waste | 30 | Unit of competency |
| D3264 | ICPSU321C | Pack and dispatch (advanced) | 50 | Unit of competency |
| D3060 | ICPCF344C | Produce complex collated or inserted (sheet/section/reel) product | 60 | Unit of competency |
| D3058 | ICPCF342C | Produce complex sequenced or multiple folded product | 50 | Unit of competency |
| D3063 | ICPCF369C | Set up and produce hand-made box | 50 | Unit of competency |
| D3059 | ICPCF343C | Set up machine for complex collating or inserting (sheet/section/reel) | 60 | Unit of competency |
| D3065 | ICPCF381C | Set up machine for complex laminating | 50 | Unit of competency |
| D3055 | ICPCF327C | Set up machine for complex rotary die cutting or embossing | 50 | Unit of competency |
| D3067 | ICPCF391C | Use electronic monitoring systems (converting and finishing) | 50 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C839 | ICP30705 | Certificate III in Printing and Graphic Arts (Print Finishing) | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J186 | ICP30712 | Certificate III in Printing and Graphic Arts (Print Finishing) | Qualification |
VET Info Notes
1. This qualification is the copyright of The Department of Employment, Education, and Workplace Relations.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS by CD&R, WA Department of Training & Workforce Development on 23/11/2010.
Entry Requirements
Not applicable.
Traineeships and Apprenticeships