Qualification Outline
22/07/2026 10:44 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Telecommunications Digital Reception Technology
Certificate II in Telecommunications Digital Reception Technology
ICT20410
W798
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 19/07/2013 | Current | Approved |
Description
Descriptor
This qualification reflects the role of an operator in the telecommunications industry who can apply a broad range of competencies in a varied work context of installation of a limited range of digital reception equipment for either a customer or an enterprise. They would perform limited fault finding on a range of digital reception equipment for both cable TV and free to air TV reception.
Cabling at the customer premises must be carried out according to requirements of the Australian Communications and Media Authority (ACMA) and relevant industry registration bodies, and in line with the specifications of the access network owner.
This qualification prepares an individual for entry to the industry.
Job Roles
Job roles and titles vary across different sectors of the industry. Possible job titles relevant to this qualification include:
TV and digital TV antenna installer
subscription TV installer
satellite TV installer
free to air TV installer.
Prerequisite requirements
There are no prerequisite requirements for individual units of competency.
Schedule
Packaging Rules
Total number of units = 128 core units plus;
1 elective unit from Group A Workplace Units plus;
1 elective unit from Group B Specialist Units plus;
2 elective units from Group C General Units
Elective units must be relevant to the work outcome, local industry requirements and the qualification level.
A maximum of two units from Group C may be substituted with two units from any endorsed Training Package or accredited course at Certificate II or III level. One of those two units from Group C may be substituted with a Group A unit where required by a specific job role
Units selected from other Training Packages or accredited courses must not duplicate units selected from or available within the ICT10 Integrated Telecommunications Training Package
Licensing, legislative, regulatory or certification considerations:
All training programs are undertaken with reference to the regulatory regime of the prevailing statutory authority (currently ACMA).
National Code of Practice for Induction for Construction Work
Some cabling and installation work may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007).
Achievement of the unit CPCCOHS1001A Work safely in the construction industry from the CPC08 Construction and Plumbing Services Integrated Framework Training Package fulfils this requirement.
1. Core Units
All eight units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3368 | ICTOHS2170A | Follow Occupational Health and Safety and environmental policy and procedures | 20 | Unit of competency |
| D3320 | ICTCBL3011A | Install and terminate coaxial cable | 20 | Unit of competency |
| D3437 | ICTTEN2105A | Install and test an internet protocol device in convergence networks | 45 | Unit of competency |
| D3340 | ICTDRE3156A | Install digital reception equipment | 50 | Unit of competency |
| D3341 | ICTDRE3157A | Locate and rectify digital reception equipment faults | 40 | Unit of competency |
| D1021 | BSBSUS201A | Participate in environmentally sustainable work practices | 10 | Unit of competency |
| D3436 | ICTTEN2007A | Use electrical skills in telecommunications work | 35 | Unit of competency |
| D3438 | ICTTEN2140A | Use hand and power tools | 40 | Unit of competency |
2. Group A Workplace Elective Units
One unit to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3521 | ICTWOR2141A | Work effectively in a telecommunications technology team | 40 | Unit of competency |
3. Group B Specialist Elective Units
One unit to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3317 | ICTCBL2162A | Install a cable lead-in | 10 | Unit of competency |
4. Group C General Elective Units
Two units to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3306 | ICTCBL2066A | Joint and terminate coaxial cable | 60 | Unit of competency |
| D3302 | ICTCBL2016A | Joint metallic conductor cable on customer premises | 80 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D253 | ICT20508 | Certificate II in Telecommunications Digital Reception Technology | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J813 | ICT20413 | Certificate II in Telecommunications Digital Reception Technology | Qualification |
VET Info Notes
1. This qualification is the copyright of DEEWR.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS on 29/10/10.
Entry Requirements
Entry requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships
