Qualification Outline
22/07/2026 7:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Telecommunications
Certificate III in Telecommunications
ICT30210
W801
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 15/06/2010 | Current | Approved |
Description
Descriptor
This qualification reflects the role of an operator in the telecommunications industry who can apply a broad range of competencies using a defined range of skills where some discretion and judgement is required in the selection, installation and configuration of equipment in convergence technologies that integrate radio, optical and internet protocol (IP) based applications.
This role includes assessing installation requirements, planning and performing installations, testing installed equipment and fault finding. It involves a degree of autonomy and may include some supervision of others involving known routines and procedures and some accountability for the quality of outcomes.
This qualification prepares an individual for entry to the industry into the mainstream of telecommunications convergence technologies of radio, optical, data and IP networks.
Job Roles
Job roles and titles vary across different sectors of the industry. Possible job titles relevant to this qualification include:
telecommunications network equipment installer
telecommunications voice and data equipment installer
IP based security alarms installer
telecommunications equipment operator
telecommunications tradesperson.
Prerequisite requirements
There are no prerequisite requirements for individual units of competency.
Schedule
Packaging Rules
Total number of units = 126 core units plus;
1 elective units from Group A Workplace Units plus;
5 elective units from Group B General Units
Elective units must be relevant to the work outcome, local industry requirements and the qualification level.
A maximum of two units from Group B may be substituted with two units from any endorsed Training Package or accredited course at Certificate II or III level. One of those two units from Group B may be substituted from Group A where required by a specific job role.
Units selected from other Training Packages or accredited courses must not duplicate units selected from or availabloe within the ICT10 Integrated Telecommunications Training Package
Licensing, legislative, regulatory or certification considerations:
All training programs are undertaken with reference to the regulatory regime of the prevailing statutory authority (currently ACMA).
National Code of Practice for Induction for Construction Work
Some cabling and installation work may fall within the definition of construction work. If so, people entering the construction site are required to complete the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (Australian Safety Compensation Council, May 2007).
Achievement of the unit CPCCOHS1001A Work safely in the construction industry from the CPC08 Construction and Plumbing Services Integrated Framework Training Package fulfils this requirement.
1. Core Units
All six units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3368 | ICTOHS2170A | Follow Occupational Health and Safety and environmental policy and procedures | 20 | Unit of competency |
| D1022 | BSBSUS301A | Implement and monitor environmentally sustainable work practices | 40 | Unit of competency |
| D3444 | ICTTEN3056A | Install telecommunications network equipment | 80 | Unit of competency |
| D3436 | ICTTEN2007A | Use electrical skills in telecommunications work | 35 | Unit of competency |
| D3438 | ICTTEN2140A | Use hand and power tools | 40 | Unit of competency |
| D3297 | ICTBWN3205A | Use optical and radio frequency measuring instruments | 35 | Unit of competency |
2. Group A Workplace Elective Units
One unit to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3527 | ICTWOR3231A | Resolve technical enquiries using multiple information systems | 35 | Unit of competency |
3. Group B General Elective Units
Five units to be completed
Note: The following outlines ONE example of a training program for this qualification. Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D3319 | ICTCBL3010A | Install and terminate optical fibre cable on customer premises | 30 | Unit of competency |
| D3331 | ICTCBL3069A | Install network cable equipment | 60 | Unit of competency |
| D3318 | ICTCBL3009A | Install, terminate and certify structured cabling installation | 30 | Unit of competency |
| D3323 | ICTCBL3015A | Locate and identify cable system faults | 60 | Unit of competency |
| D3321 | ICTCBL3013A | Perform cable and system test on customer premises | 60 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D254 | ICT30208 | Certificate III in Telecommunications | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J815 | ICT30213 | Certificate III in Telecommunications | Qualification |
VET Info Notes
1. This qualification is the copyright of DEEWR.
2. Further information on this qualification is contained in the training Package available from Australian Training Products Ltd., Tel: (03) 9630 9836.
3. This qualification was entered on to the STARS on 1/11/2010.
Entry Requirements
Entry requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships