Unit of competency Outline

Date retreived
23/07/2026 12:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace heavy commercial vehicle ancillary components and accessories

Remove and replace heavy commercial vehicle ancillary components and accessories

Unit of competency
National Code
AURHTA003
State Code
AXD49
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
18
Description
This unit describes the performance outcomes required to remove, replace and make adjustments to heavy commercial vehicle ancillary components and accessories. It involves preparing for the work, removing and replacing components or accessories, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and inspect ancillary components or accessories
  • 1.1 Task requirements are determined from workshop or activity instructions
  • 1.2 Removal and replacement procedures and information are sourced and interpreted
  • 1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove and inspect ancillary components or accessories
  • 2.1 Ancillary components or accessories are identified and removed according to manufacturer specifications and without causing damage to components or systems
  • 2.2 Inspection is carried out according to manufacturer specifications, workplace procedures, and safety requirements
  • 2.3 Inspection findings are reported according to workplace procedures
3. Replace ancillary components or accessories
  • 3.1 Ancillary components or accessories are replaced according to manufacturer specifications, and without causing damage to components or systems
  • 3.2 Adjustments are made to components or accessories according to manufacturer specifications
  • 3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instructions and workplace standards
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF134 AURHTA2003 Remove and replace heavy commercial vehicle ancillary components and accessories Unit of competency