Qualification Outline

Date retreived
22/07/2026 4:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate I in Automotive Vocational Preparation

Certificate I in Automotive Vocational Preparation

Qualification
National Code:
AUR10116
State Code:
BAD6
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0305 - Automotive Engineering And Technology
Original TGA Release Date
14/04/2016
Approved Date
13/07/2016
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
140
Duration
1 Semester
Current Release Number
2.00
Current Release Date
07/12/2018
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 07/12/2018 Current Transition (Replaced)
1.00 14/04/2016 Replaced Approved
Description

This qualification is an introductory qualification to the automotive retail, service and repair industries and an entry to further training in several sectors. It is designed for application in a highly supervised context, such as VET in Schools (VETiS) or other equivalent introduction or induction to industry environments. The range of technical skills and knowledge is limited.

Schedule
Packaging Rules
Total number of units = eight (8)
- five (5) core units, plus
- three (3) elective units, of which:
- up to three (3) units may be chosen from the Elective Units listed below
- up to two (2) units may be chosen from a Certificate I qualification or above in this Training Package or another endorsed Training Package or accredited course, provided that the units chosen contribute to the vocational outcome of this qualification and do not duplicate the outcome of another unit chosen for the qualification.
1. Core Units

All five (5) units must be completed.

State Code National Code Title Hours Type
AXE65 AURASA001 Apply automotive workplace safety fundamentals 10 Unit of competency
AXE01 AURETR003 Identify automotive electrical systems and components 10 Unit of competency
AXC61 AURLTA001 Identify automotive mechanical systems and components 15 Unit of competency
AXE90 AURAEA001 Identify environmental and sustainability requirements in an automotive service or repair workplace 16 Unit of competency
AXA64 AURTTK002 Use and maintain tools and equipment in an automotive workplace 20 Unit of competency
2. Elective Units

Three (3) electives must be completed, with at least one (1) chosen from the list below.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AXE53 AURBTA002 Adjust bicycles and components 10 Unit of competency
AWZ49 AURVTP006 Apply refinishing primers to vehicle surfaces 40 Unit of competency
AXB14 AURTTA002 Assist with automotive workplace activities 36 Unit of competency
AXD52 AURHTA001 Carry out heavy vehicle pre-repair cleaning 10 Unit of competency
AXB06 AURTTA009 Carry out mechanical pre-repair operations 20 Unit of competency
AXD09 AURJTA001 Carry out minor adjustments to motorcycles 10 Unit of competency
AXB81 AURPTA002 Carry out minor adjustments to outdoor power equipment 10 Unit of competency
AXB82 AURPTA001 Carry out pre-repair operations to outdoor power equipment 5 Unit of competency
AWZ87 AURVTN008 Clean vehicle body and door openings 20 Unit of competency
AXE05 AURETK001 Identify, select and use low voltage electrical test equipment 10 Unit of competency
AXB79 AURPTA006 Inspect and service line trimming systems and components 8 Unit of competency
AXB46 AURRTQ001 Inspect and service marine inboard propeller drive systems 30 Unit of competency
AXD27 AURHTJ001 Inspect heavy commercial vehicle wheels and tyres 10 Unit of competency
AXB41 AURRTR001 Inspect, service and maintain marine battery storage systems 10 Unit of competency
AXE84 AURAFA002 Read and respond to automotive workplace information 12 Unit of competency
AXC96 AURJTJ003 Remove and refit motorcycle wheel and tyre assemblies 10 Unit of competency
AXD49 AURHTA003 Remove and replace heavy commercial vehicle ancillary components and accessories 18 Unit of competency
AXD08 AURJTA002 Remove and replace motorcycle components and accessories 10 Unit of competency
AXE03 AURETR001 Remove and tag automotive electrical system components 22 Unit of competency
AXE55 AURBTA001 Remove and tag bicycle components 12 Unit of competency
AXA75 AURTTE003 Remove and tag engine system components 22 Unit of competency
AXB12 AURTTA001 Remove and tag steering, suspension and braking system components 16 Unit of competency
AWZ94 AURVTN001 Remove and tag vehicle body components 22 Unit of competency
OAK23 AURLTJ013 Remove, inspect and refit light vehicle wheel and tyre assemblies 20 Unit of competency
AXE43 AURBTJ001 Remove, repair and refit bicycle tyres 20 Unit of competency
AXD97 AURETR006 Solder electrical wiring and circuits 20 Unit of competency
AXB13 AURTTA003 Use and maintain basic mechanical measuring devices 16 Unit of competency
AXE86 AURAFA001 Use numbers in an automotive workplace 20 Unit of competency
Replaces
State Code National Code Title Type
J369 AUR10112 Certificate I in Automotive Vocational Preparation Qualification
Replaced By
State Code National Code Title Type
BGA3 AUR10120 Certificate I in Automotive Vocational Preparation Qualification
No information
Entry Requirements

This qualification may be accessed by direct entry.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Traineeships and Apprenticeships
No information