Unit of competency Outline
Date retreived
21/07/2026 11:13 PM AWST
21/07/2026 11:13 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Adjust bicycles and components
Adjust bicycles and components
Unit of competency
National Code
AURBTA002
AURBTA002
State Code
AXE53
AXE53
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to adjust bicycles and components. It involves preparing for the work, selecting and checking specialist tools and equipment, adjusting bicycle components to manufacturer specifications, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation for entering the bicycle retail, service and repair industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to adjust bicycle
- 1.1 Job requirements are determined from workplace instructions and bicycle to be adjusted is identified
- 1.2 Hazards associated with the work are identified and reported to workplace supervisor
- 1.3 Bicycle is inspected to determine component adjustment requirements according to manufacturer specifications and workplace procedures
- 1.4 Inspection findings, including adjustment recommendations, are reported according to workplace procedures and authorisation to proceed is obtained
2. Carry out adjustments to bicycle components
- 2.1 Tools and equipment required for adjusting bicycle are identified and checked for serviceability and adjustment method is confirmed
- 2.2 Adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
- 2.3 Post-adjustment testing is carried out to ensure safe and correct operation of the bicycle according to workplace procedures
3. Complete work processes
- 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
- 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF042 | AURBTA1002 | Adjust bicycles | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCK49 | AURBTA102 | Adjust bicycles and components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAD6 | AUR10116 | Certificate I in Automotive Vocational Preparation | Qualification |