Unit of competency Outline
Date retreived
22/07/2026 3:42 AM AWST
22/07/2026 3:42 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Adjust bicycles and components
Adjust bicycles and components
Unit of competency
National Code
AURBTA102
AURBTA102
State Code
OCK49
OCK49
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
10
Description
This unit describes the skills and knowledge required to adjust bicycles and components. The unit involves preparing for the work, selecting and checking specialist tools and equipment, adjusting bicycle components to manufacturer specifications, and completing workplace processes and documentation.The unit applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation for entering the bicycle retail, service and repair industry. The unit is designed for use in a highly supervised context. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to adjust bicycle
- 1.1 Determine job requirements from workplace instructions and identify bicycle to be adjusted
- 1.2 Identify hazards associated with the work and report to workplace supervisor
- 1.3 Inspect bicycle to determine component adjustment requirements according to manufacturer specifications and workplace procedures
- 1.4 Report inspection findings are reported according to workplace procedures and obtain authorisation to proceed
2. Carry out adjustments to bicycle components
- 2.1 Identify and check tools and equipment required for adjusting bicycles for serviceability and confirm adjustment method
- 2.2 Carry out adjustments according to manufacturer specifications, workplace procedures, safety and environmental requirements, and without causing damage to components or systems
- 2.3 Carry out post-adjustment testing to ensure safe and required operation of the bicycle according to workplace procedures
3. Complete work processes
- 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
- 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
- 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXE53 | AURBTA002 | Adjust bicycles and components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGA3 | AUR10120 | Certificate I in Automotive Vocational Preparation | Qualification |