Unit of competency Outline

Date retreived
22/07/2026 1:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, repair and refit bicycle tyres

Remove, repair and refit bicycle tyres

Unit of competency
National Code
AURBTJ001
State Code
AXE43
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove, repair and refit bicycle tyres. It involves preparing for the work, selecting and using specialist tools and equipment, removing the tyres and identifying tyre damage causes, repairing the tyres, inflating them to recommended pressure and fitting, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry. The bicycle tyres to be repaired and refitted include road, off-road, tubed or tubeless.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, repair and refit bicycle tyres
  • 1.1 Job requirements are determined from workplace instructions and customer requirements
  • 1.2 Bicycle rim types and tyre manufacturer specifications and fitting instructions are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work area is prepared and work is planned to avoid damage to bicycle, minimise waste, and use time efficiently
2. Carry out removal, repair and refitting of bicycle tyres
  • 2.1 Repair options and techniques are identified and confirmed
  • 2.2 Removal, repair, refitting and testing of bicycle tyre and tube are carried out according to safety and environmental requirements
  • 2.3 Tyres and tubes are removed, repaired, refitted and inflated without causing damage to bicycle or wheels
  • 2.4 Refitted bicycle tyres and tube are checked against customer requirements and tested according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and bicycle is presented ready for use
  • 3.2 Problems outside own area of responsibility are reported to appropriate person
  • 3.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.4 Tools and equipment are checked and stored, and faulty equipment is identified, tagged and isolated according to workplace procedures
  • 3.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF055 AURBTJ2001 Remove, repair and fit bicycle tyres Unit of competency
Replaced By
State Code National Code Title Type
OCK39 AURBTJ101 Remove, repair and refit bicycle tyres Unit of competency