Unit of competency Outline

Date retreived
24/07/2026 6:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace motorcycle components and accessories

Remove and replace motorcycle components and accessories

Unit of competency
National Code
AURJTA002
State Code
AXD08
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to remove and replace motorcycle components and accessories. It involves preparing for the work, removing and replacing the component, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive service and repair or automotive manufacturing industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace motorcycle component or accessory
  • 1.1 Task requirements are determined from workshop or activity instructions
  • 1.2 Removal and replacement procedures and information are sourced and interpreted
  • 1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Remove component or accessory
  • 2.1 Component or accessory is identified and removed according to manufacturer specifications and without causing damage to other components or systems
  • 2.2 Inspection of component or accessory is carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for replacement and minor adjustments
3. Replace component or accessory
  • 3.1 Component or accessory is replaced according to manufacturer specifications and without causing damage to components or systems
  • 3.2 Adjustments are made to component or accessory according to manufacturer specifications
  • 3.3 Post-replacement testing is carried out according to workplace procedures and further adjustments are made as required
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instructions and workplace standards
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF175 AURJTA1002 Remove and replace motorcycle components and accessories Unit of competency