Unit of competency Outline

Date retreived
23/07/2026 9:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean vehicle body and door openings

Clean vehicle body and door openings

Unit of competency
National Code
AURVTN008
State Code
AWZ87
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
039909 - Cleaning
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to wash vehicle body exteriors and clean door, hatch and boot openings. It involves preparing for the task, selecting and using cleaning equipment, cleaning and finishing products according to workplace instructions, and completing workplace processes and documentation.It applies to those working in the automotive detailing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to clean vehicle body and door openings
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted
  • 1.3 Cleaning products are selected and inspected for quality and suitability
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  • 1.6 Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle
2. Wash and clean vehicle
  • 2.1 Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements
  • 2.2 Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements
  • 2.3 Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements
  • 2.4 Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF491 AURVTN2008 Clean vehicle body and door cavities Unit of competency