Qualification Outline

Date retreived
22/07/2026 9:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate II in Automotive Body Repair Technology

Certificate II in Automotive Body Repair Technology

Qualification
National Code:
AUR20916
State Code:
BAG2
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0305 - Automotive Engineering And Technology
Original TGA Release Date
14/04/2016
Approved Date
13/07/2016
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
317
Duration
2 Semesters
Current Release Number
2.00
Current Release Date
07/12/2018
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 07/12/2018 Current Transition (Replaced)
1.00 14/04/2016 Replaced Approved
Description

This qualification reflects the role of individuals who perform a range of tasks on vehicle bodies in the automotive retail, service and repair industry.

Schedule
Packaging Rules
Total number of units = thirteen (13)
- five (5) core units, plus
- eight (8) elective units, of which:
- all units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen
- of the remaining units required to make up the elective unit total:
- up to five (5) units may be chosen from the Specialist Elective Unit Groups and the General Elective Units listed below
- up to (3) units may be chosen from a Certificate II qualification or above in this Training Package or another endorsed Training Package or accredited course, provided that the units chosen contribute to the vocational outcome of this qualification and do not duplicate the outcome of another unit chosen for the qualification.
Pathways
State Code Title
AB07 Panel and Paint Pre-apprenticeship
AB08 Vehicle Body Painting Pre-apprenticeship
AB09 Panel Beating Pre-apprenticeship
1. Core Units

All five (5) units must be completed.

State Code National Code Title Hours Type
AXE88 AURAEA002 Follow environmental and sustainability best practice in an automotive workplace 20 Unit of competency
AXE64 AURASA002 Follow safe working practices in an automotive workplace 20 Unit of competency
AXE84 AURAFA002 Read and respond to automotive workplace information 12 Unit of competency
AXA64 AURTTK002 Use and maintain tools and equipment in an automotive workplace 20 Unit of competency
AXE75 AURAMA001 Work effectively with others in an automotive workplace 20 Unit of competency
2. Group A Elective Units: Auto Body Repair

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ93 AURVTN002 Carry out non-structural vehicle panel repairs 30 Unit of competency
AWZ90 AURVTN003 Remove and store vehicle body components 24 Unit of competency
AWZ80 AURVTN016 Repair vehicle body panels using filler 30 Unit of competency
3. Group B Elective Units: Paint-Less Dent Repair

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ82 AURVTN013 Carry out paint-less dent repairs on vehicle body panels 30 Unit of competency
AWZ35 AURVTP020 De-nib, buff and polish vehicle painted surfaces 30 Unit of competency
AWZ16 AURVTT003 Remove and replace automotive and marine interior trim components 20 Unit of competency
4. Group C Elective Units: Automotive Painting

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ49 AURVTP006 Apply refinishing primers to vehicle surfaces 40 Unit of competency
AWZ54 AURVTP003 Prepare vehicle spray painting equipment for use 24 Unit of competency
AWZ55 AURVTP001 Remove paint from vehicle painted surfaces 20 Unit of competency
5. Group D Elective Units: Automotive Trimming

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ19 AURVTT002 Carry out repairs and alterations to automotive and marine trim 40 Unit of competency
AWZ16 AURVTT003 Remove and replace automotive and marine interior trim components 20 Unit of competency
AWZ18 AURVTT004 Trim vehicle components 68 Unit of competency
6. Group E Elective Units: Automotive Glazing

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AXA06 AURVTG004 Remove and install direct glazed windscreens 20 Unit of competency
AXA07 AURVTG002 Remove and install rubber glazed windscreens 20 Unit of competency
AXA00 AURVTG009 Remove and install vehicle fixed body glass 30 Unit of competency
7. Group F Elective Units: Automotive Dismantling

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ57 AURVTN042 Dismantle vehicle components 20 Unit of competency
AWZ86 AURVTN007 Remove and clean salvageable vehicle components 20 Unit of competency
AWZ60 AURVTN037 Test vehicle components for correct operation 20 Unit of competency
8. Group G Elective Units: Automotive Detailing

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ87 AURVTN008 Clean vehicle body and door openings 20 Unit of competency
AWZ13 AURVTT008 Clean vehicle interior trim 20 Unit of competency
AXA09 AURVTA001 Prepare vehicles for customer use 20 Unit of competency
9. Group H Elective Units: Vehicle Body Assembling

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ11 AURVTT009 Remove and replace vehicle and vessel seats and fittings 20 Unit of competency
AXD63 AURETR042 Remove, refit and operate electrical components following body repair activities 20 Unit of competency
AWZ91 AURVTN004 Remove, replace and align bolt-on vehicle body panels and components 58 Unit of competency
10. Group I Elective Units: Vehicle Tinting

All units in one (1) of the Specialist Elective Unit Groups A to I below must be chosen.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AXA05 AURVTG006 Apply vehicle window tinting 20 Unit of competency
AXA09 AURVTA001 Prepare vehicles for customer use 20 Unit of competency
AWZ16 AURVTT003 Remove and replace automotive and marine interior trim components 20 Unit of competency
11. General Elective Units

Up to five (5) units may be completed.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AWZ50 AURVTP005 Apply rust prevention and sound deadening materials to vehicle body components 16 Unit of competency
AWZ15 AURVTT006 Apply trimming adhesives 12 Unit of competency
AWY98 AURVTW003 Carry out advanced gas metal arc welding on vehicle body sections 30 Unit of competency
AWY96 AURVTW007 Carry out oxyacetylene thermal heating and cutting on vehicle body sections 15 Unit of competency
AWZ20 AURVTT001 Carry out sewing repairs to automotive and marine trim 40 Unit of competency
AWZ47 AURVTP008 Clean and polish vehicle paint surfaces 20 Unit of competency
AWZ14 AURVTT007 Clean plastic trim and fittings of vehicles 20 Unit of competency
AWZ89 AURVTN009 Clean vehicle engines and engine components 20 Unit of competency
AXA02 AURVTG007 Clean vehicle glass surfaces 10 Unit of competency
AWZ85 AURVTN010 Clean vehicle underbody 20 Unit of competency
AWZ35 AURVTP020 De-nib, buff and polish vehicle painted surfaces 30 Unit of competency
AXE21 AURETH001 Depower and reinitialise battery electric vehicles 10 Unit of competency
AWZ98 AURVTG011 Install side vehicle windows 30 Unit of competency
AWZ53 AURVTP002 Mask vehicle panels and components 32 Unit of competency
AWZ46 AURVTP010 Prepare and operate vehicle paint drying equipment 30 Unit of competency
AWZ37 AURVTP019 Prepare and paint plastic and composite vehicle surfaces 24 Unit of competency
AWZ42 AURVTP013 Prepare vehicle substrates for refinishing 32 Unit of competency
AXA09 AURVTA001 Prepare vehicles for customer use 20 Unit of competency
AXD58 AURETU002 Recover vehicle refrigerants 10 Unit of competency
AXA04 AURVTG003 Remove and install butyl sealed windscreens 20 Unit of competency
AWZ99 AURVTG010 Remove and install vehicle movable body glass 30 Unit of competency
AWZ84 AURVTN011 Remove and install vehicle rear vision mirrors 10 Unit of competency
AWZ88 AURVTN005 Remove and replace adhesive attached components on vehicles 20 Unit of competency
OAK23 AURLTJ013 Remove, inspect and refit light vehicle wheel and tyre assemblies 20 Unit of competency
AWZ91 AURVTN004 Remove, replace and align bolt-on vehicle body panels and components 58 Unit of competency
AXA08 AURVTG001 Repair laminated glass windscreens 20 Unit of competency
AWZ51 AURVTP021 Restore vehicle body exterior paint 30 Unit of competency
AWZ07 AURVTT021 Select and apply adhesives in automotive and marine service and repair work 15 Unit of competency
AWZ17 AURVTT005 Select trim and fabric materials 20 Unit of competency
AXD79 AURETR025 Test, charge and replace batteries and jump-start vehicles 20 Unit of competency
AWZ95 AURVTK001 Use and maintain vehicle body repair hand tools 15 Unit of competency
AXE86 AURAFA001 Use numbers in an automotive workplace 20 Unit of competency
Replaces
State Code National Code Title Type
J378 AUR20912 Certificate II in Automotive Body Repair Technology Qualification
Replaced By
State Code National Code Title Type
BFZ6 AUR20920 Certificate II in Automotive Body Repair Technology Qualification
No information
Entry Requirements

This qualification may be accessed by direct entry.

No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Traineeships and Apprenticeships
(TR06130) AUTOMOTIVE VEHICLE BODY (LEVEL 2) Traineeship