Unit of competency Outline

Date retreived
22/07/2026 7:12 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean vehicle interior trim

Clean vehicle interior trim

Unit of competency
National Code
AURVTT008
State Code
AWZ13
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to clean vehicle interior trim, including vehicle seats and floor coverings. It involves preparing for the task, selecting and using cleaning equipment, products and material, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to clean vehicle interior
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Cleaning information is sourced and interpreted
  • 1.3 Cleaning materials are identified, calculated and prepared according to vehicle manufacturer recommendations
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Cleaning tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability
  • 1.6 Work is planned to identify methods for cleaning vehicle interior, minimise waste, and use time effectively
2. Undertake cleaning activities
  • 2.1 Interior trim and seats are cleaned according to workplace instructions, customer requirements, and safety and environmental requirements
  • 2.2 Cleaning and finishing materials and tools are used according to trim and seat fabric type and without causing damage to vehicle or components
  • 2.3 Manual or machine assisted cleaning methods are used according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF560 AURVTT2008 Clean and finish vehicle interior trim and seats Unit of competency