Unit of competency Outline

Date retreived
23/07/2026 5:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

De-nib, buff and polish vehicle painted surfaces

De-nib, buff and polish vehicle painted surfaces

Unit of competency
National Code
AURVTP020
State Code
AWZ35
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to carry out final polishing activities on vehicle painted surfaces. It involves preparing for the task, selecting and using specialist tools and equipment, identifying paint defects, selecting buffing and polishing materials, de-nibbing, buffing and polishing surfaces, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out de-nibbing, buffing and polishing
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Surface repair and finish materials are selected and inspected for quality
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Hand and power tools, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work is planned to identify methods for de-nibbing, buffing and polishing, minimise waste, and prevent damage to vehicle
2. Carry out de-nib, buff and polish activities
  • 2.1 Paint contaminants are identified and removed using paint cleaning clay bars
  • 2.2 De-nibbing is conducted to remove minor paint inclusions and paint defects
  • 2.3 Hand and machine buffing and polishing are conducted according to workplace procedures and safety and environmental requirements
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF541 AURVTP3020 Carry out denibbing, buffing and polishing Unit of competency