Unit of competency Outline

Date retreived
22/07/2026 6:45 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and operate vehicle paint drying equipment

Prepare and operate vehicle paint drying equipment

Unit of competency
National Code
AURVTP010
State Code
AWZ46
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to prepare paint drying equipment. It involves preparing for the task, selecting and using specialist tools and equipment, setting, operating and maintaining paint drying equipment to manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and equipment manufacturer operating instructions for paint drying equipment are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Paint drying equipment, and personal protective equipment (PPE) are selected and inspected for serviceability
  • 1.5 Work is planned to identify paint drying equipment operating methods, minimise waste, and prevent damage to vehicle
2. Set up paint drying equipment ready for operation
  • 2.1 Paint drying equipment is prepared and set up according to manufacturer specifications, and is checked for correct operation
  • 2.2 Vehicle protection materials are organised
  • 2.3 Drying equipment is set and operated according to equipment manufacturer instructions, workplace procedures, and safety and environmental requirements
  • 2.4 Paint drying equipment is regularly checked, cleaned and maintained according to manufacturer specifications
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and paint drying equipment is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF531 AURVTP3010 Prepare spray booths and paint drying equipment Unit of competency
Replaced By
State Code National Code Title Type
OCL91 AURVTP110 Prepare and operate vehicle paint drying equipment Unit of competency