Unit of competency Outline

Date retreived
22/07/2026 11:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace vehicle and vessel seats and fittings

Remove and replace vehicle and vessel seats and fittings

Unit of competency
National Code
AURVTT009
State Code
AWZ11
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and replace seats and fittings of vehicles and vessels according to manufacturer removal and replacement instructions. It involves preparing for the task, selecting and using specialist tools and equipment, storing seats and fittings, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace seats and fittings
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal and replacement information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Hand tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Work area and storage racks are prepared according to workplace procedures
  • 1.6 Work is planned to minimise waste and use time efficiently
2. Remove and replace seats and fittings
  • 2.1 Seats and fittings are removed using manufacturer-approved methods, tools and equipment, according to safety and environmental requirements, and without causing damage to vehicle or components
  • 2.2 Seats and fittings are stored safely until needed for replacement
  • 2.3 Seats and fittings are replaced according to manufacturer replacement instructions and without causing damage to vehicle, ensuring all bolts and fasteners are used and tensioned
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Authorised personnel are informed of work outcome according to workplace procedures
  • 3.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.4 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF561 AURVTT2009 Remove and replace seats and internal fittings Unit of competency