Unit of competency Outline

Date retreived
23/07/2026 7:19 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply vehicle window tinting

Apply vehicle window tinting

Unit of competency
National Code
AURVTG006
State Code
AXA05
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
040323 - Glazing
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to prepare various glass surfaces of vehicles and apply window tinting material. It involves preparing for the task, selecting and using specialist tools and equipment, producing templates according to window size and shape, cutting tint film, installing tint film on glass surface according to workplace procedures, cleaning and finishing window, and completing workplace processes and documentation.It applies to those working in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for window tinting
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Information is accessed and interpreted from window tinting manufacturer specifications, workplace procedures, and relevant safety data sheets (SDS)
  • 1.3 Work is planned to minimise waste and use time efficiently
  • 1.4 Vehicles requiring window tint are identified, sourced and inspected to ensure no prior damage and that related accessories are operating correctly
  • 1.5 Window tinting materials are selected and checked for quality
  • 1.6 Hazards associated with the work are identified and risks are managed
  • 1.7 Application tools and equipment are selected and checked for serviceability
  • 1.8 Vehicle is protected and safely located according to workplace procedures
2. Measure and cut tinting material and templates
  • 2.1 Glass surfaces are measured accurately in order to prepare templates
  • 2.2 Templates are cut according to workplace procedures and safety and environmental requirements
  • 2.3 Window tinting materials are cut according to templates and without causing damage to vehicle or components
3. Prepare surfaces and apply window tinting material
  • 3.1 Surface preparation is carried out using approved methods and materials according to window tinting manufacturer specifications
  • 3.2 Window tinting material is applied correctly following window tinting manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 3.3 Window tint is inspected for faults according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF475 AURVTG2006 Apply window tinting Unit of competency