Unit of competency Outline

Date retreived
23/07/2026 7:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select trim and fabric materials

Select trim and fabric materials

Unit of competency
National Code
AURVTT005
State Code
AWZ17
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to select trim and fabric materials and determine attaching methods. It involves preparing for the task, selecting materials for specific applications, checking material quality, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Hazards associated with the work are identified and risks are managed
  • 1.3 Work area is prepared and a range of trim materials is gathered for inspection according to workplace instructions
2. Select and inspect materials
  • 2.1 Trim materials are selected against job and customer requirements
  • 2.2 Trim materials are checked for quality and reported if faulty
3. Determine attachment methods
  • 3.1 Attachment material information is sourced and interpreted
  • 3.2 Attachment options are analysed and those most appropriate to the circumstances are selected
  • 3.3 Selected option is reported according to workplace procedures
4. Complete work processes
  • 4.1 Final material selection is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF557 AURVTT2005 Select and apply trim and fabric materials Unit of competency