Unit of competency Outline

Date retreived
22/07/2026 12:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair vehicle body panels using filler

Repair vehicle body panels using filler

Unit of competency
National Code
AURVTN016
State Code
AWZ80
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair vehicle body panels using filler. It involves preparing for the task, selecting and using specialist tools and equipment, identifying body filler type and specifications, calculating and mixing body filler and applying it to panels, completing repairs to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry. Filler used in repair work must include two-pack polyester.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair body panels using filler
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications for body filler application and relevant safety data sheets (SDS) are sourced and interpreted
  • 1.3 Materials, including filler, needed for body panel repair are selected and checked for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work area is prepared and work is planned to minimise waste and use time efficiently
2. Carry out repair activities using filler
  • 2.1 Paint is removed and damaged panel prepared for filler repair
  • 2.2 Damaged panel sections are rectified using panel beating techniques to workplace pre-filler application standard
  • 2.3 Body filler is mixed according to manufacturer specifications
  • 2.4 Filler is applied to repair panels using approved body filler instructions and equipment according to workplace procedures, body filler manufacturer specifications, and safety and environmental requirements
  • 2.5 Repairs are completed to pre-paint condition
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace repair standards and panel is presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF502 AURVTN3016 Repair body panels incorporating filler Unit of competency
Replaced By
State Code National Code Title Type
OCL62 AURVTN116 Repair vehicle body panels using filler Unit of competency