Unit of competency Outline

Date retreived
22/07/2026 1:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare and paint plastic and composite vehicle surfaces

Prepare and paint plastic and composite vehicle surfaces

Unit of competency
National Code
AURVTP019
State Code
AWZ37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
24
Description
This unit describes the performance outcomes required to prepare and apply refinishing materials to plastic and composite vehicle surfaces. It involves preparing for the task, selecting and using specialist tools and equipment, preparing components, mixing and applying paint materials to plastic or composite components according to paint manufacturer specifications, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to paint plastic and composite components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Paint information is accessed and interpreted
  • 1.3 Plastic paint materials are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Paint tools and equipment and personal protective equipment (PPE) are identified and checked for serviceability
  • 1.6 Work is planned to identify preparation and painting methods, minimise waste, and prevent damage to vehicle
2. Clean plastic or composite surface
  • 2.1 Surface is prepared for refinishing according to paint manufacturer technical specifications and safety and environmental requirements
  • 2.2 Surface is checked to ensure it is free of oil, dust and other contaminants
  • 2.3 Surface preparation is completed without causing damage to vehicle, other components and systems
3. Apply refinishing material
  • 3.1 Plastic or composite refinishing material is applied according to paint manufacturer approved methods
  • 3.2 Refinishing material is dried using approved methods and equipment
  • 3.3 Painted area is polished and finished using approved techniques and equipment
  • 3.4 Paint finish is checked against specifications
  • 3.5 Refinishing is completed without causing damage to surrounding painted areas and components
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF540 AURVTP3019 Prepare and paint plastic components Unit of competency