Unit of competency Outline

Date retreived
22/07/2026 9:54 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean vehicle engines and engine components

Clean vehicle engines and engine components

Unit of competency
National Code
AURVTN009
State Code
AWZ89
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
039909 - Cleaning
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to wash and clean vehicle engines, engine bays and components. It involves preparing for the task, selecting and using cleaning equipment and materials, protecting engine components during cleaning process, and completing workplace processes and documentation.It applies to those working in the automotive detailing industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to clean vehicle engine and engine bay
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer recommended cleaning methods, workplace procedures and cleaning material safety data sheets (SDS) are sourced and interpreted
  • 1.3 Cleaning materials are selected, inspected for quality and suitability, and required quantities are calculated
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle
2. Wash and clean engine and components
  • 2.1 Cleaning materials, tools and equipment are used according to manufacturer recommended cleaning methods, workplace procedures, and safety and environmental requirements
  • 2.2 Engine, components and engine bay are washed and cleaned according to workplace procedures and customer requirements
  • 2.3 Components are protected according to workplace instructions, and washing and cleaning are completed without causing damage to vehicle or engine
  • 2.4 Engine, components and engine bay are dried according to workplace procedures
  • 2.5 Engine and components are inspected and tested to ensure normal operation after the washing and drying process
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and engine is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF492 AURVTN2009 Clean vehicle engine and engine compartment Unit of competency