Unit of competency Outline
Date retreived
22/07/2026 4:46 PM AWST
22/07/2026 4:46 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use and maintain tools and equipment in an automotive workplace
Use and maintain tools and equipment in an automotive workplace
Unit of competency
National Code
AURTTK002
AURTTK002
State Code
AXA64
AXA64
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to select, use, maintain and store tools and equipment in an automotive workplace.It applies to those working in all sectors of the automotive industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Select and use tools and equipment
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Tools and equipment are selected to meet job requirements
- 1.3 Tools and equipment are checked for serviceability according to manufacturer and workplace procedures
- 1.4 Personal protective equipment (PPE) suitable for tools or equipment to be used is selected and checked for serviceability
- 1.5 Tools and equipment, including PPE, are used according to manufacturer procedures and safety requirements
2. Service, maintain and store workplace tools and equipment
- 2.1 Tools and equipment are serviced, adjusted and maintained according to workplace and manufacturer schedules and procedures to ensure safe and accurate operation, within scope of own responsibility
- 2.2 Damaged or worn tools and equipment are tagged and removed from the workplace for and reported according to workplace procedures
- 2.3 Remaining tools and equipment are cleaned, checked and stored according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF421 | AURTTK2002 | Use and maintain workplace tools and equipment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCL16 | AURTTK102 | Use and maintain tools and equipment in an automotive workplace | Unit of competency |