Unit of competency Outline
Date retreived
22/07/2026 3:00 PM AWST
22/07/2026 3:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Test vehicle components for correct operation
Test vehicle components for correct operation
Unit of competency
National Code
AURVTN037
AURVTN037
State Code
AWZ60
AWZ60
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to test vehicle components to assess their suitability for future use. It involves preparing for the task, selecting and using tools and equipment, removing, cleaning and testing vehicle components for correct operation, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to test components
- 1.1 Job requirements and units and components to be tested are determined from workplace instructions
- 1.2 Task information is sourced and interpreted
- 1.3 Hazards associated with the work are identified and risks are managed
- 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for safe and correct operation
- 1.5 Work is planned to identify disassembly and testing methods, minimise waste, and use time efficiently
2. Disassemble components
- 2.1 Components are disassembled according to workplace procedures, manufacturer specifications, and safety and environmental requirements
- 2.2 Disassembled components are checked for damage or wear against manufacturer specifications
3. Clean components
- 3.1 Cleaning procedure is determined from manufacturer specifications, safety data sheets (SDS), and workplace procedures
- 3.2 Components are cleaned using approved cleaning products, materials and equipment according to safety and environmental requirements
4. Test components
- 4.1 Component is tested to determine correct operation and quality standard
- 4.2 Repair or replacement of component is determined according to test results and workplace procedures
5. Complete work processes
- 5.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for use
- 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 5.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 5.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF497 | AURVTN2037 | Disassemble and test vehicle units and components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCL71 | AURVTN137 | Test vehicle components for correct operation | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAG2 | AUR20916 | Certificate II in Automotive Body Repair Technology | Qualification |