Unit of competency Outline

Date retreived
23/07/2026 5:02 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and clean salvageable vehicle components

Remove and clean salvageable vehicle components

Unit of competency
National Code
AURVTN007
State Code
AWZ86
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to inspect and remove salvageable vehicle components and present for sale. It involves preparing for the task, selecting and using specialist tools and equipment, identifying salvageable components, removing salvageable components according to manufacturer specifications, cleaning and tagging the components for sale, and completing workplace processes and documentation.It applies to those working in the automotive parts recycling industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove salvageable components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer specifications and workplace procedures for removing salvageable components are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are identified and checked for serviceability
  • 1.5 Work is planned to identify removal processes, prevent damage to components, and use time efficiently
2. Remove, clean and prepare salvageable components for sale
  • 2.1 Salvageable components are removed from vehicle according to established removal process, manufacturer specifications, workplace procedures, and safety and environmental requirements
  • 2.2 Components are cleaned, labelled and prepared for sale according to workplace procedures
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and salvageable components are presented ready for sale
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF490 AURVTN2007 Remove salvageable components Unit of competency