Unit of competency Outline

Date retreived
22/07/2026 3:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Trim vehicle components

Trim vehicle components

Unit of competency
National Code
AURVTT004
State Code
AWZ18
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
68
Description
This unit describes the performance outcomes required to calculate, mark, cut, sew and attach trim material to vehicle components. It involves preparing for the task, selecting and using specialist tools and equipment, selecting trim materials and checking their quality, developing material patterns, fabricating, assembling and attaching trim to components and checking trim against specifications, and completing workplace processes and documentation.It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Trim materials are selected and inspected for quality
  • 1.3 Safety data sheets (SDS) are sourced and interpreted
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Trim tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.6 Work is planned to minimise waste and use time efficiently
2. Measure, mark, cut and fabricate trim
  • 2.1 Material patterns are developed and prepared for use
  • 2.2 Trim materials are measured, marked and cut according to workplace instructions and prepared pattern
  • 2.3 Trimming tools and equipment are used according to workplace procedures and safety and environmental requirements
  • 2.4 Trim is fabricated according to work instructions and job requirements
3. Attach trim
  • 3.1 Trim materials are fitted and checked for alignment, appearance and quality according to job specifications and workplace instructions
  • 3.2 Trim materials are attached to vehicle component and checked against specifications
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable materials is collected and stored
  • 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF556 AURVTT2004 Trim vehicle components Unit of competency