Unit of competency Outline
Date retreived
22/07/2026 1:44 PM AWST
22/07/2026 1:44 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Carry out advanced gas metal arc welding on vehicle body sections
Carry out advanced gas metal arc welding on vehicle body sections
Unit of competency
National Code
AURVTW003
AURVTW003
State Code
AWY98
AWY98
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030711 - Boilermaking And Welding
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to carry out advanced gas metal arc welding (GMAW) to replace structural and non-structural vehicle body sections during vehicle body repair work. It involves preparing for the task, selecting and using GMAW equipment, setting gas flow pressures and welder settings, operating gas metal arc welder, selecting and using suitable personal protective equipment (PPE), inspecting and testing weld quality, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare to carry out advanced GMAW
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Welding information is accessed and interpreted
- 1.3 Hazards associated with the work are identified and risks are managed
- 1.4 Tools and equipment are selected and checked for serviceability
- 1.5 Work area is prepared and work is planned to carry out GMAW, minimise waste, and use time efficiently
2. Weld using GMAW welder
- 2.1 GMAW equipment is prepared, set up and adjusted for specific welding job requirement according to manufacturer procedures and safety and environmental requirements
- 2.2 Weld test runs are conducted according to workplace instructions and weld specifications
- 2.3 Materials are welded using standard or inverter GMAW process to industry and original equipment manufacturer (OEM) or authorised agency standards
3. Check welds
- 3.1 Welds are cleaned using appropriate tools and techniques and according to workplace instructions
- 3.2 Weld specifications and quality requirements are checked and confirmed by visual inspection and destructive testing
- 3.3 Weld defects are identified are prepared for re-welding as required, and appropriate personnel are notified
4. Complete work processes
- 4.1 Final inspection is made to ensure work meets workplace expectations and components are presented ready for use
- 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF577 | AURVTW2003 | Carry out gas metal arc welding procedures | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCI82 | AURVTW103 | Carry out advanced gas metal arc welding on vehicle body sections | Unit of competency |