Unit of competency Outline

Date retreived
22/07/2026 1:42 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out advanced gas metal arc welding on vehicle body sections

Carry out advanced gas metal arc welding on vehicle body sections

Unit of competency
National Code
AURVTW103
State Code
OCI82
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030711 - Boilermaking And Welding
Original Release Date
31/03/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to carry out advanced gas metal arc welding (GMAW) to replace structural and non-structural vehicle body sections during vehicle body repair work. It involves preparing for the task, selecting and using GMAW equipment, operating gas metal arc welder, selecting and using suitable personal protective equipment (PPE), and completing workplace processes and documentation.The unit applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare to carry out advanced GMAW
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Obtain and interpret welding information
  • 1.3 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.4 Identify tools and equipment required for welding and establish serviceability according to workplace procedures
2. Weld using GMAW welder
  • 2.1 Set up and make adjustments to welding equipment according to manufacturer specifications, workplace procedures, workplace health and safety and environmental requirements
  • 2.2 Carry out welding test runs according to workplace procedures
  • 2.3 Weld materials using GMAW process according to workplace procedures and required specifications
3. Check welds
  • 3.1 Clean welds are according to workplace procedures
  • 3.2 Carry out visual inspection and destructive testing and confirm weld quality and specifications
  • 3.3 Identify weld defects and prepare for re-welding as required, notifying appropriate personnel
4. Complete work processes
  • 4.1 Conduct final inspection according to workplace procedures and confirm component is ready for use
  • 4.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 4.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWY98 AURVTW003 Carry out advanced gas metal arc welding on vehicle body sections Unit of competency