Unit of competency Outline

Date retreived
23/07/2026 12:39 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove, replace and align bolt-on vehicle body panels and components

Remove, replace and align bolt-on vehicle body panels and components

Unit of competency
National Code
AURVTN004
State Code
AWZ91
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
58
Description
This unit describes the performance outcomes required to remove, reassemble and align vehicle body panels as part of vehicle body repair activities. It involves preparing for the task, selecting and using specialist tools and equipment, following original equipment manufacturer (OEM) or authorised agency specifications and workplace procedures, carrying out a final alignment inspection, and completing workplace processes and documentation.It applies to those working in the automotive body service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove, replace and align bolt-on vehicle body panels and components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Removal, replacement and alignment methods are determined from workplace procedures and vehicle specifications
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability
  • 1.5 Vehicle and work area are prepared according to workplace procedures
  • 1.6 Work is planned to minimise waste
2. Carry out removal, replacement and alignment activities
  • 2.1 Bolt-on body panels and components are removed according to vehicle specifications and safety requirements
  • 2.2 Removed parts are tagged and stored according to workplace procedures
  • 2.3 Bolt-on panels and components are replaced using approved processes, sealants, materials and equipment
  • 2.4 Bolt-on panels and components are aligned without causing damage to vehicle or components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF487 AURVTN2004 Remove, replace and realign bolt-on panels, sections and fittings Unit of competency
Replaced By
State Code National Code Title Type
OCL89 AURVTN104 Remove, replace and align bolt-on vehicle body panels and components Unit of competency