Unit of competency Outline

Date retreived
22/07/2026 6:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out paint-less dent repairs on vehicle body panels

Carry out paint-less dent repairs on vehicle body panels

Unit of competency
National Code
AURVTN013
State Code
AWZ82
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to repair shallow dents and hail damaged body panels using paint-less dent repair (PDR) processes. It involves preparing for the task, selecting and using specialist tools, repairing vehicle panels to pre-damage condition using PDR methods, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out PDR repairs
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Workplace procedures and PDR tool manufacturer specifications are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
  • 1.5 Work is planned to minimise waste and use time efficiently
2. Repair panel using PDR process
  • 2.1 Vehicle panels and work area, including lighting requirements, are prepared for PDR work
  • 2.2 PDR tools are fabricated or modified to suit work requirements
  • 2.3 Components are repaired using approved PDR methods and equipment according to workplace procedures and safety requirements
  • 2.4 Advice is sought from authorised personnel if repair interferes with vehicle trim or electrical systems
  • 2.5 Painted surface is finished according to workplace procedures, and PDR repairs are checked against workplace instructions and workplace quality standards and finish requirements
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and panel or component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF499 AURVTN3013 Carry out paint-less dent repairs Unit of competency
Replaced By
State Code National Code Title Type
OCJ02 AURVTN113 Carry out paint-less dent repairs on vehicle body panels Unit of competency