Unit of competency Outline

Date retreived
22/07/2026 8:52 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Clean and polish vehicle paint surfaces

Clean and polish vehicle paint surfaces

Unit of competency
National Code
AURVTP008
State Code
AWZ47
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to clean and polish vehicle paint surfaces. It involves preparing for the task, selecting and using cleaning and polishing material to detail vehicle paint surfaces, selecting and using specialist polishing equipment, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to clean and polish vehicle paint surfaces
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Cleaning information is accessed and interpreted
  • 1.3 Cleaning and polishing materials are selected and checked for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work is planned to identify cleaning and polishing methods, minimise waste, and avoid damage to vehicle
2. Carry out cleaning and polishing activities
  • 2.1 Cleaning and polishing tools and equipment are used according to workplace procedures and safety and environmental requirements
  • 2.2 Products are used according to vehicle paint finish type, workplace methods and paint manufacturer specifications
  • 2.3 Exterior paint finish is cleaned and polished according to workplace and manufacturer procedures
  • 2.4 Cleaning and polishing are completed without causing damage to vehicle components or systems
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF527 AURVTP2008 Clean and polish vehicle exterior paint Unit of competency